Marble and granite surfaces are dirty, worn, scratched and can be refurbished. Professional renovation equipment must be used for refurbishment. When renovating, the special grinding discs and polishing powders of Taixue or Granite should be selected according to the stone type, and the grinding should be carried out strictly from the 枉 to the fine ones according to the order of the grinding discs, in order to achieve the ideal polishing effect and realize the ground refurbishment. maintenance.
First, coarse grinding and leveling
Rough grinding (grinding) uses diamond grinding discs for stone grinding machinery; rhombohedral, resin grindstone (36 mesh, 60 mesh) or stone refurbished tablets (30 mesh, 50 mesh) for stone deformation, paving, processing, etc. The formed cuts, unevenness and scratches caused by the construction process are ground and leveled, and the weathered layer and pollution of the stone surface are removed.
Second, fine grinding
Fine grinding is a 120-mesh, 240-mesh, 400-mesh diamond grinding disc, diamond bituminous, resin grindstone or 150-mesh, 300-mesh, 500-mesh stone refurbished piece for rough grinding (grinding) ground stone Grinding is performed to eliminate scratches left by rough grinding (grinding), further adjusting the flatness of the polished surface, and laying a good foundation for subsequent fine grinding. So the purpose of fine grinding is to eliminate scratches.
Third, the stone inspection and repair
After the rough grinding and flattening, an inspection and repair is carried out. The repair is made of resin or stone marble glue, and the hole crack and the collapse of the stone surface are repaired. The purpose of the repair is to repair the damage. After fine grinding, it should be repaired again, and the resin or stone marble glue should be used to repair the broken part of the crack and the area where the caulking agent is not full or peeled off, so that the gap and the collapse angle can be flat and full. Effect.
Fourth, fine grinding and polishing
Fine grinding is performed by polishing the ground with 800 mesh, 1200 mesh resin polished stone and resin grindstone, and polishing the surface with 51000, 10LG or 1000 mesh, 2000 mesh, 3000 mesh water-grinding tablets. After the fine grinding, the gloss is improved very high, the surface density of the marble stone is improved, and the gloss is generally up to 70 degrees. The purpose is to: brighten and polish.
Fifth, the stone surface recrystallization hardening treatment
The concept of stone recrystallization hardening treatment: the stone grain flour special material is combined with the structure and structure of the stone surface layer by the heat generated by the friction under the action of the machine, and the texture is relatively hard and bright. The crystal layer is blended to improve the hardness and wear resistance of the stone.
1. Use the all-purpose cleaner first, and clean it thoroughly with the equipment and red scouring pad.
2. Adjust the marble powder from 1:1 into a paste with water and apply it to a red polishing pad. Grinding directly on the stone, the calcification reaction of the stone surface, so that the stone restores the brightness as new.
[Scan the QR code below, pay attention to the WeChat public number "Jiuzheng Stone Net "; you will receive the latest stone news, information, business opportunities! What are you waiting for? Join the China Building Materials First Network - Stone Group: 65406142]
Automatic Motion Sensor Led Lamp,Automatic Led Light Sensor,Automatic Motion Sensor Led Light,Led Automatic Lights
Foshan Nai An Lighting Electric Co.,ltd , https://www.twinspotlights.com