What should be paid attention to when installing anti-theft system in shopping malls

[ Pacific Security Network News ]

What should be paid attention to in the installation of anti-theft system in shopping malls?

Store anti-theft system installation should pay attention to the first one, identify the scene to eliminate the first time

In order to ensure the quality of the project, it is necessary to first investigate the source of the interference. If it cannot be eliminated, install the machine away from the interference source. There are two types of interference sources: the first is active interference, such as various spark interference, motors, hair dryers and sparks caused by poor contact, or interference caused by severe power clutter; The interference is passive interference, such as a coiled wire near the machine, a POS machine at the checkout counter, various signal lines of the printer, and whether the power line has a roll.

Store anti-theft system installation should pay attention to the second, what should pay attention to the detector installation

1) Do not install the detector within 0.5 m of the metal door or within 1 m of any metal object. Metal objects include metal studs, display shelves, metal display cases, metal shopping carts, and more.

2) Do not install the detector within 2 meters from the cash register, credit card identification device, telephone, computer, data cable, neon, air conditioner and heater.

Shopping mall anti-theft system installation should pay attention to three, power precautions

1) Strictly grounding Some three-pin sockets do not have a grounding terminal. You need to re-pull a special line from the power distribution cabinet. This is done on the one hand in compliance with safety standards to avoid accidents; on the other hand, it reduces crosstalk in the power grid.

2) Guaranteed heat dissipation Because the system works for a long time, although the power box has sufficient power margin, if it is placed in a narrow or even semi-closed place, the temperature rise of the component too fast will affect the stable operation.

Derrick FLC2000 PWP Shaker Screen

Replacement Screens for Derrick FLC 2000 / 48 Ã— 30 Shale Shakers â€“ PWP

Derrick Flc2000 Pwp Shaker Screen, also famous known as 48-30 screens, are compatible with Derrick FLC (Flo-Line Cleaner) 2000 series shale shakers. It is a hook strip flat type Shaker Screen, which is constructed of multiple stainless steel 304 or 316 wire mesh cloth layers. And then bonded to a rectangular or hexagonal perforated metal plate for added support and facilitation of repair.

Technical Parameter