People who pay attention to quality are increasingly hoping to install embedded kitchen appliances in the kitchen. The embedded kitchen appliances will make the kitchen look beautiful. Especially for open kitchens, there are several types of embedded appliances. Oven, steamer, dishwasher, microwave oven, etc., today, Xiaobian to popularize the installation of embedded kitchen appliances need to pay attention to some matters.
(1) The size of the front face of general embedded appliances (oven, steamer, dishwasher, microwave oven) is 600mm, which is basically used in Europe. Therefore, before you decorate or add new appliances, you must carefully understand the location. Choose the size of each part of the embedded home appliance, the general appliance store will have such a DM single, and then design the cabinet after understanding the size.
(2) Taking embedded ovens as an example, such appliances have high power and need to be separately wired from the meter box. Therefore, when designing the kitchen, professional designers are required to design the overall layout of the wires, and also consider the future addition. The need for new home appliances, leaving a reserved location;
(3) Most of the embedded appliances use front-end heat dissipation methods, but some brands use rear-mounted heat dissipation. There is a big safety hazard in adopting such heat dissipation methods. Therefore, it is necessary to ask for clear in purchasing; The personnel design, ventilation and heat dissipation must be specially laid out to ensure safe use.
(4) When installing embedded electrical appliances, pay attention to the position of water, electricity and gas pipelines and related plugs, sockets and valves. Generally speaking, the position of the socket and the valve must be arranged on one side of the appliance. If it is located behind, it will definitely be unable to be safely in place due to insufficient depth.
(5) Because the temperature of the oven is very high, the cabinets for installing the electric oven must use high-temperature resistant electrical cabinets for electrical appliances.
(6) The difference between the embedded and the independent refrigerator is mainly in the heat dissipation mode. The independent refrigerator dissipates heat on both sides and the box, but the embedded refrigerator has cabinet plates on both sides, so the heat dissipation can only be carried out from the back of the box. In the design of the cabinet, the heat dissipation belt from the ground to the back of the box and the top plate must be considered. When installing, it is necessary to reserve about 10 to 20 cm of heat dissipation space above or below. The appearance can be made into a decorative ventilation grille, and there should be a proper space behind the refrigerator to avoid direct fitting with the wall surface, at least a cooling space of not less than 5 cm is reserved.
[Scan the QR code below, pay attention to the WeChat public number "Jiuzheng cabinet network "; you can view the popular article " Do cabinets, look like the boss, in fact, the most difficult person! 》 , want to communicate with peers can join the Jiuzheng building materials network cabinet exchange group]
Fold Flat Mask,Civil Protective Mask,Kn95 Filters Cup 3D Mask,Kn95 Filters Fold Flat Respirator
Ningbo Autrends Prevention Products Co., Ltd , https://www.autrendsafety.com