【Knowledge】Using common knowledge on safety equipment

The highest proportion of high-level crashes and object-strike accidents occurred in high-level operations. Many cases of accidents have shown that due to the correct wearing of safety helmets, seat belts or the establishment of safety nets according to regulations, accidents are avoided. Facts have proved that helmets, seat belts, and safety nets are important measures for reducing and preventing accidents such as falling from high places and hitting objects. Often referred to as "three treasures." Workers must use helmets properly, adjust caps, and tie caps; use seat belts correctly and keep them low.

Helmets Helmets are protective hats that protect the human head from external forces (such as object strikes). When using it, pay attention to: (1) Select a safety helmet that has passed the inspection of the relevant department and has an "An Kam" sign on it. 2 Before wearing the cap, check whether the shell is damaged, whether there is a qualified cap lining, and whether the cap is complete. If it does not meet the requirements, replace it immediately. 3 Adjust the cap and cap lining and tie the cap.

Seat belts are protective equipment for high altitude workers to prevent falling injuries. When using it, pay attention to: 1 Use seat belts that have been inspected by relevant departments and ensure that they are in use. 2 Safety belts are strictly prohibited from knotting and connecting. 3 In use, be sure to hang in a secure place, hang high and use low, and to prevent swinging, avoid open flame and thorn cut. Above 42m in vacant work, seatbelts must be used. 5 Where safety belts cannot be directly installed, safety harnesses, safety railings, etc. shall be provided for the safety belts.

Safety Nets Safety nets are used to prevent people and objects from falling or to avoid or reduce the impact of falling and objects. When using it, pay attention to: 1 Use a safety net with a certificate. 2 If the safety net is damaged or aged, it should be replaced in time. 3 The connection between the safety net and the frame should not be too tight.