1. Before the mosaic is laid, the surface of the mosaic should be placed against the wall and placed on the wall. The four corners should be foamed to prevent sharp corner damage. It is strictly forbidden to press heavy objects on the surface.
2. Apply high-bond cement or tile adhesive when laying.
3. The base surface should be free of loose objects, oily, solid surface, smooth and clean.
4. If the base layer is not flat, it should be flattened with cement first, and the thickness of the whole piece of the mosaic should be reserved. The thickness of the adhesive is 3-5 mm. It is strictly forbidden to lay directly on the uneven base surface.
5. When the whole flower is laid, it needs to be wet, and the surrounding bricks are dry, and the size of the mosaic (height) must be adjusted first.
6. Use a serrated mud plate, adjust the thickness and then spread it to keep it flat and free of empty drums.
7. The whole flower can be laid at the same time as the surrounding bricks, so as to balance the flatness of the whole brick.
8. When fine-tuning and leveling, be careful to use a rubber hammer to gently tap a few times in the middle, and then make adjustments on the side.
Timber-beam Formwork
Timber Beam H20---cost-effective formwork girder
Formwork
With Timber beam & Plywood, the formwork is low weight but high load capacity, it is widely used in construction.
Flat Formwork
Characteristics:
Component with high standardization.
Assembling in site, flexible application.
Light weight, easy transportation and storage.
Single-side bracket
During single-sided concreting, the concrete pressure is transferred into the sub-structure by means of the single-side bracket.
Characteristics:
â—† For concrete heights up to 8.0m and a fresh concrete pressure up to a maximum of 60KN/m2.
â—† Good standard performance and versatility.
â—† Fast element coupling, all units can be quickly connected.
â—† The finished wall is excellent and absolutely waterproof.
â—† Optimized sizes for transportation.
Formwork Accessories,Concrete Formwork Accessories,Tie Rod Formwork Accessories,Aluminium Formwork Accessories
HENGSHUI PIONEER IMP & EXP TRADING CO ., LTD , https://www.hspioneer.com