1. Take out the basin drainer and remove the fixings and flanges under the water purifier.
2. When installing the basin, pay attention to pick up the basin top, take out the flange of the water purifier, and fasten the flange of the water purifier to the basin.
3. After tightening the flange, place the basin on the table and align the drain to the exit of the table. This step is the key to the installation of the basin.
4. Wrap the raw material belt at the appropriate position of the water purifier to prevent water leakage. It should be noted that when installing the water in the basin, be sure to point the water purifier to the drain of the basin.
5. Align the water purifier with the water outlet and put it flat. Note that the installation of the water in the basin must be taken out of the fixture of the water purifier and screwed onto the water purifier. Remember to tighten the water retainer with a wrench.
6. After the basin is installed, it must be tested. Fill the basin with water and see if there is any dripping or water leakage.
Silicone Lamp,Kids Night Light,Colorful Silicone Lamp,Rechargeable Silicone Lamp
Yuyao Flylit Appliance Co.,Ltd , https://www.flylitlight.com