The importance of hydropower
The installation of hydropower is a “ hidden project †. A hidden project is a site that, after the completion of a previous process, will be covered by the next process and cannot be inspected after completion. To do house decoration, the “ hidden project †is the key. If the “ hidden project †is not done well, the surface will be beautifully decorated, which is also futile.
The " hidden project " can be divided into water installation, electrical installation, moisture protection and waterproofing. Each of these projects can not be ignored. If any one of the links goes wrong, it may bring serious economic losses and even hurt personal safety. Here, consumers who are ready to decorate will talk about the installation and construction of hydropower and the identification of materials in the “ hidden project †to avoid unnecessary economic losses and injuries.
First of all, our wires must be worn with PVC sleeves and the light cannot be directly laid.
Because PVC sleeves are insulators, this is for safety!
The discharge of the wires is horizontal and vertical, and the joints should be covered with insulating cloth.
Switch, socket must have a cassette.
The quality of the cassette is also important because it has two cap holes on the sides that are used to secure the switch.
If there is a problem with the quality of the cassette, the subsequent installation of the switch will be difficult.
The installation switch is basically at the end of the renovation project.
It will be complicated and time-consuming to re-work at that time.
　　
In addition, the home should have a lot of air switches.
This makes it easy to operate each switch.
The socket is generally 30cm away from the ground and should not be less than 20cm .
The switch is 1.3m high above the ground .
These are not hard rules, and everyone can make adjustments based on the actual situation of their own home.
For example, some people prefer to place the socket on the desk above the desk so that it can also be dropped.
　　
Also note some small details.
For example, switches, sockets, leakage protection devices, distribution boxes and other electrical connectors connected to electrical appliances,
There should be a little spare.
There are also separate wires for strong and weak electricity.
Some workers save time and place it inside a casing.
Then when using strong electricity, it will certainly interfere with weak electricity.
Attention to these small details, I believe we can work with electricians to cloth their own home wire!
Building materials knowledge entrance decoration restaurant decoration switch socket electrical decoration
Pdc Cutter For Oil,Pdc Cutter For Gas,Excellent Performance Pdc Cutter,Pdc Cutter Oil Drill Bit
HENAN YALONG DIAMOND TOOLS CO.,LTD , https://www.pdcpcbncutter.com