Superhard Materials Branch 2012 Work Summary

In 2012, the European debt crisis repeatedly deteriorated and the global economic growth slowed down noticeably. The domestic initiative to regulate the real estate market and resolve the risks of investment and financing platforms, the economic growth is facing greater downward pressure. The Party Central Committee and the State Council adhere to the general tone of steady progress, put steady growth in a more important position, gradually stabilize the economic operation, and the domestic economic operation is in the process of seeking a new balance. New progress has been made in economic restructuring. At the same time that economic growth slowed down, the employment situation was generally stable. The industrial gradient transfer speed is accelerated, the new product development and sales cycle are shortened, and the quality is improved. The trend of machine replacement labor is increasingly obvious, and the organic composition of capital and labor productivity are simultaneously improved. The Superhard Materials Branch will keep up with the national situation, and have done a lot of work around the 2012 work points of the General Conference and the work plan of the Branch, and carried out a variety of activities: organized the 2012 China Superhard Materials Industry Technology Development Forum and other large and small industry conferences 5 2 groups; participated in international exhibitions 2 times; organized 1 exhibition (CCMT2012); participated in stone and ceramic exhibition 3 times; organized training examinations and examinations 3 times; edited and published 25 magazines and information books, accounting for 3.56 million words; Absorbed 4 members. It has played its due role as a “bridge” and a “link” and improved its own construction. The summary report is as follows:

1. Work closely around the main points of the work of the General Conference and complete the tasks assigned by the General Conference.

1.1 Communicate the spirit of the General Meeting in a timely manner and implement the guidelines of the General Conference

The first meeting of the Secretary-General was held in Beijing on March 26, 2012. It was confirmed that the main task of the association's work this year is to promote the application of technological innovations in the industry around the center of “bigger and stronger”; the main principle is innovation. The working ideas, contents and methods of the association, combined with the advantages of the association's own resources, are correctly positioned; it is necessary to build an industry development platform to provide services for the development of the whole industry; truth-seeking and pragmatic, down-to-earth.

Our club will make full use of the four-time executive directors' expansion meeting held in Zhoushan, Zhejiang Province from April 10 to 11, 2012, and the website and website of the association to carry out vigorous publicity and timely convey the spirit of the general meeting.

1.2 Actively participate in CCMT2012 and prepare for CIMT2013 exhibition, organize exhibitors to write testimonials

The exhibition is one of the main ways to show the development of technology in the industry, promote product sales, and do practical things for enterprises. It is also the main channel for the economic sources of the General Conference and one of the key points of the work of the General Conference. This club has always attached great importance to this activity. There are 14 exhibitors in CCMT2012, with an exhibition area of ​​only 135 square meters. The number and area of ​​exhibitors have reached a record high.

The CIMT2013 branch received a total of 28 member companies' application for participation. Due to the limited booth area, the club had to dismiss the work. Finally, 22 exhibitors were identified, with an exhibition area of ​​264 square meters. The number and area of ​​exhibitors reached a record high.

1.3 Actively organize enterprises to participate in the “five top ten enterprises” declaration, encourage the industry to produce more boutiques and famous brands.

Since the establishment of the “Top Ten Enterprises” appraisal work, our club has been actively participating every year. The member companies are famous on the list every year. This activity has greatly promoted the establishment of corporate brand awareness and efforts to build quality products. The 4 member units of our club won the title of 4 “Top Ten” in 2011 (including the 3 top ten titles that are still valid during the review period), respectively: Zhongnan Diamond Co., Ltd. was awarded “Top Ten Enterprises for Brand Creation Activities” "The title; Zhengzhou Abrasives Grinding Research Institute, Henan Huanghe Industrial Group Co., Ltd. and Guangdong Benlang New Materials Co., Ltd. have passed the review, the original "Top Ten Enterprises for Independent Innovation" and "Top Ten Enterprises for Brand Creation Activities" The title continues to be valid.

1.4 Strengthen learning and exercise, improve service ability

Strengthening the construction of the club is one of the key tasks of our unremitting efforts. Perfect organization and high-quality staff are the basic guarantee for doing a good job in the association and giving full play to the role of the association. As always, we ask our staff to strengthen their study. They not only learn the national policies and regulations on industry development, but also learn industry expertise, especially new technologies and technologies for the manufacture of superhard materials and products. It is necessary to have a considerable theoretical level, but also to have a broad range of professional knowledge, to understand and master the development of the industry, to exercise and improve the level of organizational coordination in practical work, and to improve the ability to serve members. Through various activities planned by the club and various technical materials compiled by the organization, the staff's organizational coordination, text editing, advertising design, publishing and publishing capabilities have been greatly improved, and high-quality publications have improved the society of my club. Influence, cohesion and combat effectiveness.

1.5 Keep up with the development of the situation and adjust the membership structure in time

The speed of technological advancement and the changing market have led to the continuous rise and fall of enterprises, especially small ones. Enterprises that continue to develop and master high-tech, pay attention to the development of two markets at home and abroad continue to grow and develop, while those with backward technology, low added value of products, single market and weak development are constantly declining, some are difficult to survive, some are discontinued or Conversion. Some companies do not understand, support, or participate in the work of the association due to changes in leaders. The club should continuously strengthen the role of the propaganda association. With the changes in the company's situation, the team will continue to adjust the membership structure, replenish fresh blood in a timely manner, and constantly vomit the new ones to ensure the vitality of the club. In 2012, a total of 4 new member units were absorbed: Luoyang Meike Diamond Co., Ltd., Hongyuan Superhard Materials (Henan) Co., Ltd., Xi'an Qinling Diamond Wheel Co., Ltd. and Zhengzhou Jintai Metal Materials Co., Ltd., which timely adjusted and improved the membership structure. The vitality of the club is guaranteed. There are also a number of companies actively requesting to join the association and are arranging for review and approval.

2. Conduct colorful club activities according to the characteristics of this industry

2.1 Preparing to hold the 4th executive director expansion meeting and industry high-level forum to guide the industry to become stronger and bigger

On April 10th and 11th, 2012, the Superhard Materials Branch organized four fourth executive directors (expansion) meetings and industry high-level forums in Zhoushan, Zhejiang. The main topics of the meeting are: 1. Communicate the spirit of the first meeting of the Secretary-General in 2012; 2. Review the work summary of the club in 2011; 3. Review the 2012 work plan of the club and the main work arrangements in the near future; 4. Report superhard materials. The industry is listed in the national strategic emerging industries; 5. Reporting on the production and import and export of superhard materials in China in 2011; 6. The leaders of well-known industry leaders will give speeches on the theme of strengthening and expanding the core competitiveness of enterprises. .

Chairman Zhu Feng first gave a welcome speech. He thanked everyone for taking the time to participate in the meeting and discuss the development of the industry. Secretary-General Li Zhihong made a report on the first five topics of the meeting. It conveyed the spirit of the Secretary-General’s meeting and announced that the Superhard Materials Branch was named the 2011 Advanced Chapter. In the form of graphic and graphic report, the main work achievements of the club were reported. In 2012, the plan focused on grasping industry research, strengthening communication with relevant government departments, striving for the loose policy of industry development, and starting preparations for the “Sixth Zhengzhou International Superhard” in 2013. Seminar on Materials and Products and large-scale events for supporting exhibitions. With the theme of “Leadership, Ministerial Promotion, Academician Support, Association Efforts, and Superhard Materials in Strategic Emerging Industries”, the Ministry of Science and Technology, the National Development and Reform Commission, the Ministry of Industry and Information Technology, and the China Consulting Corporation have been displayed for more than three years with rich graphic slides. The State Administration of Taxation, the China National Machinery Association and other government and association management departments to the super-hard materials industry to investigate each important event scene, showing the scene of the Secretariat's organization of industry policy research, writing special reports and other important activities; showing the importance of the national ministry The document clearly includes the super-hard materials industry and products in the priority development and key support catalogues, as well as the next step in which the Secretariat will continue to seek policy support. The Secretary-General also reported on the production and import and export of superhard materials in the industry in 2011. He used 10 statistical tables to illustrate the production of superhard materials in 2011, the import and export of related products and the market share in major consumer countries.

After the Secretary-General reported the situation, the participants reviewed and approved the summary and plan of the club. After the council, a meeting of the directors was organized to discuss the preparatory plan for the celebration of the 50th anniversary of the birth of Chinese synthetic diamonds in 2013. Many constructive comments were made.

After completing the Council's scheduled issues, an industry high-level forum was held. The chairman or general manager of 11 companies gave a speech. The speeches of the CEOs were brilliant and varied, the insights were unique, the experience was valuable, the value of inspiration and reference was very high, and the audience gave warm applause from time to time.

2.3 Preparation for the preparation of "China's super hard materials industry for 50 years", for the fiftieth anniversary of synthetic diamonds

In order to celebrate the 50th anniversary of the birth of China's synthetic diamonds, some experts in the industry were consulted and decided by the meeting of the presidents of the association: to write a history of the development of China's superhard materials industry, dedicated to the 50th anniversary of China's synthetic diamonds. The history of development is divided into two parts, namely, "China's super hard materials industry for 50 years" and "Recalling the past and the years."

To this end, the establishment of the "China Superhard Materials Industry Fifty Years" writing committee, the first meeting of experts on June 15, 2012, after 18 deliberations and enthusiastic discussions of leaders and experts, formed a history of implementation plans, Prepare a draft outline.
In order to advance the preparation work, more than 50 leaders and experts gathered in Zhengzhou on August 27-28, 2012, participated in the plenary meeting of the editorial board of development history, discussed and formed detailed plans and plans for the preparation work, including the implementation of the development history. Program and schedule, development history preparation outline and catalogues at all levels, arrangements for the number and format of each chapter, and the specific writing plan and writing staff of the lower part of the history of development, "Recalling the past and the ages."

After the meeting, the writers worked actively and submitted the outline and draft according to the schedule. According to the plan, printing will be delivered in May next year, dedicated to the 50th anniversary of diamonds.

2.4 Preparation for the 2012 China Superhard Materials Technology Development Forum to guide the industry's technological progress

The China Superhard Materials Technology Development Forum was held in Yichang from October 23 to 26, 2012! The conference attracted more than 260 industry colleagues from more than 100 companies across the country to participate in the conference. The scale and influence of the conference reached a new height.

The meeting was chaired by Professor Li Zhihong, the secretary-general of Chaoxie. The forum was respectively chaired by Super Association Expert Committee, Professor of the Iron and Steel Research Institute, Shen Dongtong, Executive Deputy Director, Professor Wang Qinsheng of Henan University of Technology, Deputy Director, Liu Mingyao, Deputy Director of Zhengzhou Abrasives Grinding Research Institute, Member, China Nonferrous Guilin Xie Zhigang, deputy dean of the Institute of Mineral Geology, member of the committee, Zhan Zhibin, chairman of Beijing Xinxing Jinbei Diamond Co., Ltd., and Zhang Xiangfa, deputy general manager of Zhengzhou Zhongnan Jiete Superhard Materials Co., Ltd., presided over the meeting. Secretary-General Li Zhihong opened the session with "Slow progress in structural adjustment, from heavy to strong, and heavy on the road - the analysis of the economic operation of the super-hard materials industry in 2011", and introduced the national key enterprises diamond, cubic boron nitride and its statistics compiled by the Super Association Secretariat. The production and operation of related products, as well as the import and export of industrial products by customs statistics, and through the comparison of data in recent years, introduced the environment in which the whole industry was weak in the world economy and the domestic economic growth slowed down in the first half of 2011 and the first half of 2012. The progress made under the concentration analyzes some of the ills and new problems in the development of the industry, and calls on the super-hard materials and products enterprises to further accelerate the structural adjustment, conscientiously engage in production, make steady research, and make great efforts to develop high-end products. Focusing on the pursuit of production and the focus on quality and efficiency, and thus increasing the research on the world's high-end products, and constantly moving forward for the real rise of China's super-hard materials! In the next day and a half, a total of 20 papers were preached and exchanged. The meeting arrangement was full and orderly. The academic atmosphere of the venue was strong, and the effect of the conference was fully affirmed by the delegates.

It is worth mentioning that this meeting also received special attention from the Fuyang Municipal Government of Henan Province. Wang Xinting, deputy secretary of the CPC Fuyang Municipal Committee and executive deputy commander of the construction headquarters of Zhengzhou New Materials Industry Cluster, led the leaders of the Municipal Development and Reform Commission and the Bureau of Commerce to participate in the forum personally. After the agenda of the forum, all the delegates were entitled "Comprehensive Report on reducing the comprehensive operating costs of enterprises and improving the competitiveness of enterprises in science and technology. It highlights the location advantages of urban construction and economic development in Fuyang City and the construction of Zhengzhou New Materials Industry Cluster. At the same time, we sincerely invite all participating industry experts and enterprises. The person in charge went to Fuyang to investigate the investment.

At the invitation of Yichang Black Cyclone Saw Industry Co., Ltd., the conference secretariat arranged for delegates to visit their company on the afternoon of the 25th. Zhang Yuncai, the general manager of Black Cyclone Company, personally received the experts from the industry at the entrance of the Black Cyclone Technology Park. He enthusiastically introduced the development history and main products of Black Cyclone, and led the delegates to visit the company's exhibition room and production workshop. Communication and promotional effects.

During the forum, the conference secretariat also used the conference room corridor to attach a small desktop booth with 4 exhibitors. They are Henan Huanghe Cyclone Co., Ltd., Henan Huifeng Diamond Co., Ltd., Zhengzhou Bray Gold Welding Materials Co., Ltd., Shijia Micro-Technology Co., Ltd. exhibits synthetic diamond, synthetic diamond powder, silver solder for diamond tools and metal powder. During the conference, each booth was crowded with people, and the representatives who came to consult were in constant stream. The conference secretariat has also set up a booth to promote the excellent technical books published in mainland China and Taiwan in recent years, in order to provide better technical and information support for enterprises.

2.5 Preparation for the 2012 Annual Work Conference of Henan Superhard Materials Industry Alliance to guide the members to obtain policy support

On the afternoon of October 25, 2012, the 2012 Annual Work Conference of Henan Superhard Materials Industry Alliance was held. The meeting was presided over by Professor Li Zhihong, Deputy Secretary-General of the Industry Alliance. The leaders were Guo Huimin from the High Technology Department of the Henan Provincial Development and Reform Commission, Song Linying, Director of the High Technology Division of the Zhengzhou Development and Reform Commission, Guo Kai, Director of the High Technology Section of the Xuchang Development and Reform Commission, and the Secretary General of the Union and Zhengzhou Abrasives. Liu Mingyao, deputy director of the Abrasives Grinding Research Institute. At the meeting, the provincial and municipal development and reform commission leaders first introduced the specific content of the “Twelfth Five-Year Plan for Strategic Emerging Industries in Henan Province”. Subsequently, Secretary General Liu Mingyao introduced the progress of the implementation of ten key projects in the superhard materials industry chain. . After discussion by the delegates, the meeting was successfully concluded after summarizing and determining the next steps of the alliance.

2.6 Continue to actively carry out international activities and strive to promote domestic and international technical exchanges and cooperation

In addition to normal communication and information exchange with the United States, Japan, India, and South Korea, the club's international activities carried out this year are as follows:

(1) Organizing to participate in the 8th German Grinding Technology Exhibition (GrindTec), and had a fruitful exchange on the cooperation between A&G Expo and GrindTec.

GrindTec is organized by the German Precision Tool Grinding Industry Association (FDPW) and has been held every two years since 1998. The exhibits include almost all products in the grinding industry chain of grinding machines, abrasives, tools and grinding fluids. The 8th exhibition held from March 14th to 17th this year increased to 447 exhibitors from 25 countries, with an exhibition area of ​​28,000m2. Among the 17 Chinese exhibitors, 9 super-hard materials companies. GrindTec is currently the world's most professional, the most complete product, the highest level of technology, the largest grinding exhibition. Chinese exhibitors and visitors have enjoyed a lot of results and are very satisfied with the results of the exhibition and the services of the pavilion.

The GrindTec organizers attached great importance to the Chinese pavilion and invited members of the pavilion to participate in the opening ceremony. On the afternoon of the opening of the exhibition, FDPW Chairman Jurgen Baldus, Vice Chairman Uwe Schmidt and Project Manager Wilfriend Saxler arranged a special meeting with members of the Chinese pavilion. Chairman Jurgen Baldus introduced the basic situation of the previous GrindTec exhibition and the importance and expectation of the Chinese pavilion. . Secretary-General Li Zhihong and stressed that China has become the largest market for grinding products in the world. Germany is a big country in the manufacture of precision grinding equipment and high-end abrasives. China is a major consumer of abrasives manufacturing and grinding equipment. The complementarity in this field is strong and the prospects for cooperation are limitless. The leaders of the two sides conducted detailed and in-depth consultations on the 15th. The German side promised that the GrindTec exhibition will immediately convene the Council to study the cooperation between the two exhibitions and communicate with the Chinese in a timely manner. The results of the talks were satisfactory.

In addition, after the exhibition, Secretary-General Li Zhihong returned to Germany's Trenker Company and A1's Element Six Company in A&G Expo 2011. Mr. Trenker, General Manager of Trenker, and Walter Friedrich Huhn, Executive Director, Head of Strategy and Marketing, Element Six Waiting for the warm reception.

This group exhibition and visit was very successful and achieved the intended purpose. The members of the pavilion opened up trade channels, broadened their international horizons, and saw new products and technologies.
(2) Participated in the 26th Japan International Machine Tool Show (hereinafter referred to as JMTOF2012) on 2012.11.1~7, among which 3 member companies set up exhibition booths, namely Henan Fenike Superhard Materials Co., Ltd., Zhengzhou Zhongnan Jiete Superhard Materials Company, Henan Yuxing Huajing Micro-Drill Co., Ltd.; 4 member companies visited the exhibition and met with new and old customers: Beijing Wald Superhard Tools Co., Ltd., Henan Huifeng Diamond Co., Ltd., Hebei Presman Diamond Technology Co., Ltd., Qingdao Sisha Taiyi Grinding Co., Ltd.

JMTOF2012 has 10 exhibition halls with more than 800 booths, nearly 70 booths with super-hard materials exhibits, more than 30 booths for grinding wheels and abrasives, and exhibitors from super-hard materials and abrasives are mainly from Japan, Europe and America. There are only a few overseas exhibitors, and only three companies producing diamond and cubic boron nitride abrasives in China are exhibiting (excluding Zhengzhou Diamond Precision Manufacturing Co., Ltd., which is exhibited in the name of a Japanese agent). Although the exhibition was influenced by political factors, it still did not lose the grace of the international exhibition. During the exhibition period, the flow of people was woven and the exchanges were active.

On the afternoon of November 1, 2012, the Superhard Materials Branch held a symposium with the Japan Industrial Diamond Association. The Japanese president, Kazuo Kazuo, and Li Zhihong introduced the composition of their respective members, the main duties of the association, and the basic situation of the diamond industry and market in the two countries. President Chuanxiong expressed support for the large-scale activities of Chinese counterparts. After the exhibition, the council will hold a meeting to discuss the matter. The two sides also exchanged views on matters of mutual concern. After a brief exchange, the mutual understanding has been further enhanced and the relationship between the two conferences has been deepened. Both sides hope to continue to maintain friendly exchanges, support each other in major events, and build bridges between exchanges and cooperation among member units to promote mutual cooperation between the two countries. Healthy development.

During the exhibition, the Secretary-General also paid a visit to Mr. Sugimoto Hiroshi, Vice President of Japan's Tomei Diamond Co., and learned about the company's products and introduced the 5-carat large single crystal produced by the domestic six-face press. At the exhibition, the members of the delegation were very busy, not only paying attention to the exhibits of the peers, but also gaining insight into the development direction of product technology, and visiting new and old customers with a purpose, and taking the opportunity to visit the customers' factories and negotiate trade. All members have different degrees of harvest, some have signed new trade contracts, and some have clarified the direction of product technology in the future. Everyone is satisfied with the group's participation in the Japan exhibition.

2.7 Actively carry out industry professional skills appraisal work, and strive to cultivate high-skilled personnel with certificates

Completed the revision and improvement of the abrasive manufacturing and abrasive manufacturing of the National Occupational Classification (Machinery Part), and organized industry experts to refine the main tasks of the abrasive abrasive manufacturing profession and reported it to the center. In June this year, he participated in the summary work of the professional ceremony held in Beijing, and put forward constructive comments on the revision of the professional ceremony.

Arrange the training of the appraisers of the six appraisal sites of the sub-center and its subordinates, so that the professional skills appraisal of the abrasives and abrasives manufacturers can be carried out smoothly.

He organized the professional qualification appraisal of 60 diamond synthesizers of Huanghe Cyclone Co., Ltd. This appraisal strictly controls the theoretical training and practical examinations, and invites Professor Li Ying from the Materials College of Henan University of Technology to participate in the appraisal. Conducting theoretical training and inspecting and supervising the on-site examination and supervision, the quality of the identification was further improved. The 60 employees and 51 skilled workers who participated in the skill appraisal passed the appraisal.

The identification activity of the diamond sawing and drilling tool manufacturer at the Foshan appraisal point in Guangdong was organized. Combined with the company's appraisal in 2010, the content of the test paper was reviewed and the theoretical training was put forward. Professor Wang Qinsheng gave theoretical training to the employees who participated in the appraisal. This is the second skill appraisal held by Guangdong Benlang New Materials Co., Ltd. The identification effect and quality are constantly improving and improving. 43 employees who participated in the appraisal, 38 passed The identification.
Organized the skill identification of the abrasive manufacturing-diamond synthesizer conducted by the Nanyang appraisal point, and contacted Professor Li Ying of the Materials College of Henan University of Technology to conduct theoretical training on 81 diamond synthesizers of Zhongnan Diamond on December 12~14, followed by theoretical and The actual test, the test results will be reported to the center as soon as possible.

Actively promote mutual cooperation with local colleges and universities, complement each other's advantages, promote the extensive development of abrasive skill professional skills appraisal, and promote the advancement of manufacturing technology in the abrasives industry.

3. Strengthen statistical work, run industry yearbooks and various publications

The club is responsible for 6 issues of domestic and international public publication magazines (1.2 million words), 16 issues of industry-issued magazines (108+340,000 words), a yearbook (340,000 words), and a collection of papers (400,000 words). Publish regular tasks. Among them, the bimonthly magazine "Diamond and Abrasives Engineering" magazine is the only Chinese-language core journal published in the abrasives industry at home and abroad and China's core academic journals. It represents the academic and technical level of the industry in China and is subject to government press and publication management every year. The department's review and evaluation needs to be done well; the monthly magazine Abrasives Newsletter is an informational publication including abrasives, superhard materials and coated abrasives, which quickly publishes major industry-wide news; quarterly China Superhard Materials is a chapter journal, which mainly publishes the major information and some technical information of the superhard materials industry. The China Abrasives Industry Yearbook is the only annual information publication in the industry. Despite the difficulty of statistics, the accuracy of operational data still needs to be improved. However, it is authoritative and provides authoritative data for industry development and corporate decision-making. It should do its best at all costs; the "Superhard Materials Technology Development Forum Proceedings" is an important document of the annual meeting of the chapter, showing the industry's achievements. The latest research results and new products guide the development direction of the industry technology, and each year is about several months. , Call for Papers, expert reviewers and editor to complete.

The above-mentioned 24 books and magazines produced and published by my branch in 2012 accounted for 3.36 million words. Provide the industry with a wealth of technical, economic and trade information.

4. Strengthen the construction of branch Internet sites and improve the level of information services

"China Superhard Materials Network" is the portal of the club, the main public opinion position of the club, and the information platform for industry services. Over the years, it has continuously filled up the content of technology, products, standards, economic and trade information, etc., and its influence has been continuously expanded. It has become an important window for domestic and foreign people to understand China's super-hard materials industry, and has become one of the main channels for enterprises to communicate with the world. Relevant documents, meeting notices, and domestic and international news of the club activities were timely and online, and the multi-faceted information was quickly and widely transmitted. The large-scale event organization designed a special edition webpage to conduct special reports, which not only facilitates the inspection of relevant industry personnel, but also serves as a paperless archive of the association. In 2012, the website management has reached a new level, attaching importance to the market and integrating into the market and entering the enterprise. The website staff not only actively participated in the meetings of the industry associations, but also actively participated in related trade exhibitions such as hardware, machine tools, stone materials, abrasives and abrasives exhibitions. To expand the impact of the website. After the revision, it achieved good results. The website world (alexa) ranked more than 1 million at the beginning of the year, and the ranking increased by more than 600,000 at the end of the year, reaching a maximum of 358,000. The number of websites has increased from 136,929 in 81 countries in 2010 to 192,115 in 114 countries. The number of page views has increased from 407,578 to 798,238. The number of pages per visit has increased from 2.98 to 2.78. 4.16, the average dwell time increased from 2 minutes 45 seconds to 4 minutes 50 seconds. All kinds of indicators have been greatly improved compared with the previous year.

5 Conclusion

In 2012, under the leadership of the General Conference and the support of the general members, the club successfully completed the tasks assigned by the General Conference and the annual plan of the club. Focusing on adjusting the product structure of the industry and improving core competitiveness, specially invited foreign experts to give lectures in China, promote technological advancement in the industry, develop domestic and foreign markets for member companies, strengthen industry self-discipline, report on the economic operation of the industry, discuss the development direction of the industry, and guide the industry. We have done practical things in terms of healthy and sustainable development and cultivating high-skilled talents in the industry. We have won praises from our members, and have also improved the quality of our staff. We have been able to play the role of bridges and ties in the association and achieved It is a gratifying result, but due to the lack of manpower and insufficient funds, it is deeply unsatisfactory to fully serve the members. There are many things that need improvement and improvement in the work. I sincerely hope that the general meeting and the general members will give pointers to the work of the club. One floor.
This summary will be submitted to the Council for consideration.

Steel Grating

For products reference
No.	Item	Description
1	Bearing Bar Size	25x3, 25x4, 25x4.5, 25x5, 30x3, 30x4, 30x4.5, 30x5, 32x5, 40x5, 50x5, 65x5, 75x6, 75x10---100x10mm etc.
		I bar: 25x5x3, 30x5x3, 32x5x3, 40x5x3 etcUS standard: 1''x3/16'', 1 1/4''x3/16'', 1 1/2''x3/16'', 1''x1/4'', 1 1/4''x1/4'', 1 1/2''x1/4'', 1''x1/8'', 1 1/4''x1/8'', 1 1/2''x1/8'' etc.
2	Bearing Bar Pitch	12.5, 15, 20, 23.85, 25, 30, 30.16, 31, 32.5, 34.3, 35, 38.1, 40, 41.25, 60, 80mm etc.
		US standard: 19-w-4, 15-w-4, 11-w-4, 19-w-2, 15-w-2 etc.
3	Cross Bar Size and Pitch	Twisted bars 5x5, 6x6, 8x8mm; Round bars Dia.6, 7, 8, 9, 10, 12mm and so on.
		38.1, 40, 50, 60, 76, 80, 100, 101.6, 120, 135mm, 2'' & 4'' etc.
4	Material Grade	ASTM A36, A1011, A569, Q235, S275JR, SS400, Mild steel & Low carbon steel, etc.
		Stainless steel SS304, SS316.s335jr
5	Surface Treatment	Black, self colour, hot dip galvanized, painted, powder coating, electrolytic polishing.
6	Grating Style	Plain / Smooth, Serrated /teeth, I bar, serrated I bar.
7	Standard	China: YB/T 4001.1-2007, USA: ANSI/NAAMM(MBG531-88),UK: BS4592-1987, Australia: AS1657-1985,Germany: DIN24537-1-2006, Japan: JIS.
8	Panel Size:	3x20ft,3x24ft,3x30ft,5800x1000, 6000x1000, 6096x1000,6400x1000, as request
9	Application:	oil refinery,petroleum and chemical Industry, Seaport and airport, power plant, transportation, papermaking, medicine, steel and iron, food, municipality, real estate, manufacturing,metallurgy,railway,boiler,etc

Steel Grating,Steel Bar Grating,Galvanized Steel Bar Grating,Steel Bar Grating For Bridge

HEBEI KAYI BUILDING MATERIAL TECHNOLOGY CO.,LTD , https://www.kayigrating.com