In home decoration, you need to use a lot of decoration plates. At present, the quality of various plates on the market is uneven. Consumers must make scientific choices when choosing. Special attention should be paid to the following points:
First, recognize the difference between man-made thin wood veneer and natural wood veneer veneer: the texture of the former is basically straight texture, texture patterns have rules; the latter is a natural wood pattern, natural texture pattern, relatively large variability, no rules .
Second, observe the appearance of the plate. The appearance of the plate should have a good beauty, the material should be detailed and uniform, and the color should be clear. The wood grain is beautiful, and the texture of the matching board and the parquet should be arranged according to certain rules. The wood color is similar, and the patchwork is almost parallel to the edge of the board.
Third, the surface should be no obvious flaws. The surface of the plate with good material should be smooth, free of burr groove marks and planer marks; there should be no phenomenon of glue penetration and board surface contamination (such as local yellowing and blackening); surface cracks, cracks, no knots should be selected. Clips, resin capsules, and gum lanes; the natural warpage of the entire panel should be as small as possible to avoid sand penetration phenomena due to improper sanding processes and substrate exposure.
Fourth, the plastic layer structure is stable, no open plastic phenomenon. It should be noted that bulging and delamination cannot occur between the surface veneer and the substrate and between the internal layers of the substrate.
Fifth, to choose low formaldehyde release sheet. Decorative panels with pungent odors should be avoided. Because the greater the odor, the higher the amount of formaldehyde released, the greater the pollution, the greater the danger.
6. Choose products that have clear production companies. Should choose a product with a clear name, site and brand name.
Seventh, for the three-dimensional decorative panels, poor quality nails are gently stroked on the surface of the board with a fingernail, leaving an obvious impression, and high-quality decorative panels will not have these problems.
Building materials knowledge plate entrance decoration formaldehyde home decoration decoration
TOPCON Solar,TOPCON Solar Panel,TOPCON Solar PV Module,TOPCON PV Module,TOPCON Solar Module
Jiangyin Haoxuan Technology Co., Ltd. , https://www.haoxuan-tech.com