Precautions when using KOYO bearings

Source: China Bearing Network Time: 2013-04-19

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

Rolling KOYO bearings are fine parts; demand is stable when used. No matter how high-performance KOYO bearings are used; assuming improper application; the expected high performance will not be obtained. The following are some precautions for the use of bearings.
First, adhere to the hygiene of KOYO bearings and their adjacent environment, even if the fine dust that is invisible to the naked eye enters KOYO bearings; it will also add bearing wear; oscillation and noise. KOYO bearings and their surrounding accessories should be hygienic; especially dust and dirt, Both things and the working environment must be kept clean.
Second, the use of the device should be carefully and banned from strong stamping; banned the hammer directly knocking KOYO bearings; banned through the rolling body to transmit pressure.
Third, the use of appropriate and correct devices can use special things; such as KOYO special heaters and pullers, etc.; try to avoid the use of cloth and short fibers and the like.
Fourth, to avoid the corrosion of KOYO bearings directly take KOYO bearings by hand; must wash the sweat on the hands; and apply high-quality mineral oil before operation; in the dry season and summer, special attention should be paid to rust. However; Under special operating conditions; KOYO bearings can obtain a better life than traditional accounting; especially in the case of light loads. These special operating conditions are; when the rolling surface (trajectory and rollover) is effectively treated by a smooth oil film The appearance and damage that can be caused by the separation and confinement of pollutants. In fact; under the conditions of ambition; the so-called Yongshi KOYO bearing life is able.

Recommend to friends comments close window

Bearing related knowledge

Disposal method and cause of overheating of motor bearing overturned vocabulary of rolling bearing (3)
High quality tapered roller bearing 32008X
Bearing support selection needs to be considered the introduction of cement mill main bearing

This article links to http://
Please indicate the bearing network http://

Previous: The reason that affects the SKF imported bearing grinding èœ• change layer: The following should be paid attention to when installing agricultural machinery parts

Portable Mast

Portable Mast ,Portable Telescopic Antenna Mast,Tv Antenna Extension Pole,Push Up Pole For Cb Antenna

TIANHEMAST , https://www.robomasts.com