The cabinets in my home can be quite ups and downs. At the very beginning, we chose a brand-name cabinet, a fixed 2,248-meter solid wood cabinet, and bought the cabinets to send them to the vertical cabinets, including the countertops. Door panel oak solid wood, cabinet fir or melamine. Finally, helpless abandoned 250 deposits also abandoned it.
The reason is as follows:
1. The designer is very unprofessional. The first solution we gave was to wash the washbasin in the kitchen and wash the sink on the balcony. Later, we said we must not accept it. He said, "Then your cabinet should be widened." When we asked how much we would like to widen, he directly stated that he wanted to widen 15cm and did not measure it. (Actually, other kitchen cabinet designers carefully measured the size of our sink and kitchen area and discovered that they only need to widen 3cm.) And their home prices are particularly expensive, because they claim to buy the cabinet from the cabinet. We merely widened the cabinet, and they actually asked us to collect the total price of 75/58. In the end, we would add us more than 2,000.
2, a variety of extra charge items are numerous. For example, the top line is 180 meters.
3, only to give the table vertical part of the cabinet this algorithm, in fact, very tricky, it looks very cheap 2248 a meter, but only to give the table vertical part of the cabinet means that my family a total of 5 meters cabinet at least 2 meters can not be cabinet In addition, some places do not want to go to the counter and have to go to the counter, otherwise it is not a loss.
4. The presented table is said to be very poor.
5, the cabinet with fir board, supervision designer captain told me to be transformed. However, their home melamine board looks poor.
The terms are too overbearing, and I blame the time when I paid the deposit. It's a good time to learn. 250, buy a lesson. Afterwards, the seemingly tempting terms must not be fooled.
The second one is the XX cabinet. This company is quite big and has branches all over the country, and its reputation is quite good. We were impressed with XX at first. That workmanship, that way, really nothing to say, is much better than the first time you buy a cabinet. Unfortunately, the price is too expensive to give up. Finally chose a third brand of cabinets, relatively cheaper prices.
We can collect a list of possible money. When you sign a contract, you can refer to:
1, the hinge, replaced by the damping of the general to increase the money, 10 one is the least we have ever asked.
2, drawers, replaced by Heidi division dampened but also to add money, this is very expensive, we have asked at least 200-300 one, a lot of cabinet manufacturers non-damped drawers are only willing to send three, more than three to receive money . If the kitchen is large before paying the deposit, be sure to discuss a few more. Otherwise it may seem expensive.
3, side panels, side exposed panels. If the door panel is a molded board with a special color, it is difficult to see if the cabinet side is not covered with a layer of leather. The price is about 200/flat is a reasonable range.
4, glass doors, some manufacturers to increase the glass door, some glass doors do not increase, but the copper bar glass to be added. This personally feels nothing.
5, grid doors, this general should be added, in fact, there is no meaning, not clean.
6, gas support, want to do on the door of the tx who pay attention, how much money must be negotiated in advance, after the increase is very expensive. Some unscrupulous js will probably say "then you don't use gas braces". There is no more inconvenience.
7, hardware, including rice boxes, pull baskets, seasoning racks and so on. This is to increase the money is basically can not escape, to achieve and js to negotiate if you buy if the package does not include the installation, if js hardware is expensive, then we buy it.
8, some unscrupulous manufacturers of baseboards will have to add money.
9, the top line This is for solid wood and rural style cabinets, add up to very powerful, often 150-200 meters. Be sure to talk in advance!
10, The light line is the same as above, but it does not have any effect.
11, disinfection cabinet door, if the door is relatively good, this must call them deduct the money, refused to deduct the money to change people. Is the price of the cabinet board the same as the price of the door panel?
12, table, this flower head up! Because the general business price is based on the table does not include the open, the table will often be called the business. So maybe their cabinet price is not high, the table hit you. It is best not to order the countertops produced by these cabinet brands because the moisture is too high to compare. Composite acrylic countertops, even if the acrylic content is the same, there is a big gap, the quartz stone gap is even greater, 300-400 also, nearly 2000 also.
Accessories price list
Some of the high-end cabinets will give you an idea of ​​how good their hardware is. They use moisture-proof mats, they use waterproof aluminum, and so on.
What is the value of these so-called premium accessories? The following prices I have collected the general price of the Internet for your reference.
Blum damping steel pumping: drawers with steel plates on both sides, not just guide rails. Only cabinets with a volume of 4000 meters or more have heard of this, and generally only three will be sent. I decided to use this, and 400 more. The actual price: 300 or so. The blum's generally damped drawer rails (not just steel but only rails) are less than about 200. Hettich is roughly similar.
Rapidly mounted damping hinges: Damping hinges that can be directly and easily detached from the door panels are generally only seen in cabinets above 4000/meter. The actual price is: blum30, and the actual cost per meter increase is less than 200. Hettich's hinges are basically cheaper.
Air support: Hettich's poetry is relatively expensive, generally within 50, and other brands are generally a dozen blocks of twenty.
Anti-slip mat, dust-proof angle, waterproof aluminum film: This cost is very low, it is a matter of a few dollars.
Therefore, cabinet makers that increase the price for their own top-level hardware are basically added to the hypocrisy, because one plus adds three or four thousand.
JS Common Caterpillar Cabinets Doors Price Glass Drawers Cabinets Doors Glass Cabinets Doors Cabinets Doors Kitchen Doors Glass Doors Doors Kitchen Glass Sliding Doors
* Plate FLANGE (Plate Flange, Flat Flange, Plain Flange)
* SLIP ON FLANGE (SORF SOFF FLANGE)
* WELDING NECK FLANGE (WNRF FLANGE)
* BLANK FLANGE (BLIND FLANGE, BLFF FLANGE, BLRF FLANGE)
* THREADED FLANGE (SCREWED FLANGE)
*BACKING RING FLANGE
French Standard Flanges,Pipe Tube Connections,Plate Flange with Flat Face,Forged Pipe Flanges
Shandong Zhongnuo Heavy Industry Co.,Ltd. , https://www.znforged.com