Maintenance and maintenance of air conditioning fans

There are many advantages to using air conditioning fans, but how to use, store, and clean them most rationally and scientifically? Here are a few tips:

â–  Horizontally placed air-conditioning fans should be placed horizontally, and should not be tilted. Check whether the outlet power supply is consistent with the parameters on the fan nameplate before use.

■ Air conditioner fans that are often added with water or are deactivated for a long time must be filled with water before use. The water level can be observed by water mark to control the amount of water added. Unplug the power plug before adding water to prevent damage to the electrical components. The water level to be filled rises to near the “highest” position. Do not overfill; after filling the water, close the door and use it for cooling. Pay attention to the condition of the water mark. When the water level drops to near the “lowest” position, the water should be added, otherwise the cooling effect will be lost.

â– Frozen ice crystals are equipped with two ice crystals. Every night, one of them is kept in the refrigerator of the refrigerator for a period of time. The next day, it is taken out and put into the water tank for better effect.

â–  Appropriate humidification If you want to use the humidification and humidification air supply, you must first add water to the water tank. After starting the operation for about 1-3 minutes, the outlet air temperature is lowered by the ambient temperature and the best effect is achieved. When there are conditions, add low-temperature cold water or ice water, and the cooling effect is better. If you add the right amount of spices in the water, it will be a burst of fragrant and cool zephyr. In the hot summer, you will feel refreshed and happy.

■ The air-conditioning fans that swing and blow the air have the function of swinging the air to the left and right. When the wind is required to be oscillated, just press the “wind direction” selection button once, so that the “swinging wind” indicator light is on, that is, the air is automatically sent right and left, and the air is supplied. If the angle is 120 degrees, if you do not need to swing the air supply, press the wind direction selection button once to make the “directional wind” indicator light, then stop the swing and direct the air supply. At the same time, the upper and lower air supply positions can be adjusted. If the direction of the long air guide piece is adjusted by hand, the air supply direction can be all downwards or upwards, and adjusted to the optimal position according to your needs.

â– Maintenance of the air-conditioning fan for a long time, the water in the water tank should be cleaned up, and the air should be supplied at a normal temperature for a period of time, so that the filter part of the machine, especially the filter part, is completely dry and then put on the plastic bag for reuse.

â–  After cleaning the air conditioner fan for a long time, it is best to clean it once every two weeks, as follows: (1) Unplug the power supply; (2) Loosen the screw and remove the rear cover; (3) Pull out the connector. Remove the filter and the back cover together; (4) Mix with detergent and water to the appropriate concentration; (5) Put the filter and the back cover into the container, wash for 10-15 minutes, then wash with water, do not The small motor is immersed in water and the small motor is not washed with water; (6) Reinstall the filter and the rear cover back.

Spring Washer

Refers to the part between the connected part and the nut. Generally, flat metal rings are used to protect the surface of the connected parts from being scratched by the Nuts and to disperse the pressure of the nut on the connected parts.


The gaskets are divided into: flat washer - C, large washer - A and C, extra large washer - C, small washer - A, flat washer - A, flat washer - chamfered - A, high strength washer for steel structure, spherical washer, conical washer, square bevel washer for I-beam, square bevel washer for channel steel, standard spring washer, light spring washer, heavy spring washer, internal tooth lock washer Internal serrated lock washer, external serrated lock washer, external serrated lock washer.

Spring Washer,Flat Washers,Grade A Washers,Bonded Seal Washers

Suzhou Gubao Screws Co.,Ltd. , https://www.hongyiscrew.com