At present, with the increasing development of LED display industry in China, LED large-screen displays in the streets of major cities gradually increase, people's consumption levels are also growing, LED lighting has gradually applied to the daily life of the family, LED Electronic display not only enhances the image of the city, LED also enriches people's cultural life, in this regard can reflect the LED industry's development speed is so fast, while we enjoy the LED electronic screen brings economic benefits, some have LED electronic display The screen business does not fully understand the LED electronic screen operation and use precautions to lead to shorten the life of LED electronic display screen. Here, senior professional of Aisiwei company explains to us the LED electronic display screen operation and use precautions. To ensure that the led display system safe and normal operation!
First, switch LED electronic display notes:
1 switch sequence:
When opening the screen: first boot, then open the screen.
When closing the screen: turn off the screen first, and then turn off the computer (the first time you turn off the computer, the display screen will not be turned off, which will cause the screen body to appear bright spots. The led burns the lamp and the consequences are serious.)
2. The interval between switching screens should be more than 5 minutes.
3. After the computer enters the engineering control software, it can turn on the electricity.
4, to avoid opening the screen in full white screen state, because at this time the system's maximum inrush current.
5. Avoid opening the screen in an out-of-control state because the system's inrush current is maximum.
A computer does not enter the control software and other programs;
B computer is not powered;
C Control section power is not turned on.
6. When the ambient temperature is too high or the heat dissipation conditions are not good, the led lighting should be careful not to open the screen for a long time.
7. When one part of the electronic display screen has a very bright line, it is necessary to pay attention to closing the screen in time. It is not appropriate to open the screen for a long time in this state.
8. Frequent display power switch tripping, should promptly check the screen or replace the power switch.
9. Check the tightness of the attachment regularly. If loose, pay attention to adjust in time, re-strengthen or renew the hanger.
10. According to the environment of the large-screen display screen and the control part, insect bites should be avoided, and rodent-proof drugs should be placed when necessary. lED display <br> <br> Second, the control part of the change, changes in Notes
1. The power line of the computer and the control part is zero, and the fire cannot be reversed. It should be plugged in according to the original position. If there are peripherals, after the connection is complete, test whether the chassis is powered.
2. When controlling equipment such as a mobile computer, check the connection line and the control panel for looseness before powering on.
3. Do not arbitrarily change the position and length of communication lines and flat connection lines.
4. If abnormalities such as short-circuit, tripping, burning, or smoking are found after moving, the power-on test should not be repeated and the problem should be promptly searched.
Third, the use of software operation precautions
1 software backup: WIN2003, WINXP, application programs, software installation programs, databases, etc. It is recommended to use "one-click restore" software, easy to operate.
2 Proficient in installation methods, raw data recovery, and backup.
3 master control parameter settings, basic data preset modifications 4 skilled use of procedures, operations and editing.
5 Regularly check* to delete unrelated data Non-professional staff, do not operate the software system.
First, switch LED electronic display notes:
1 switch sequence:
When opening the screen: first boot, then open the screen.
When closing the screen: turn off the screen first, and then turn off the computer (the first time you turn off the computer, the display screen will not be turned off, which will cause the screen body to appear bright spots. The led burns the lamp and the consequences are serious.)
2. The interval between switching screens should be more than 5 minutes.
3. After the computer enters the engineering control software, it can turn on the electricity.
4, to avoid opening the screen in full white screen state, because at this time the system's maximum inrush current.
5. Avoid opening the screen in an out-of-control state because the system's inrush current is maximum.
A computer does not enter the control software and other programs;
B computer is not powered;
C Control section power is not turned on.
6. When the ambient temperature is too high or the heat dissipation conditions are not good, the led lighting should be careful not to open the screen for a long time.
7. When one part of the electronic display screen has a very bright line, it is necessary to pay attention to closing the screen in time. It is not appropriate to open the screen for a long time in this state.
8. Frequent display power switch tripping, should promptly check the screen or replace the power switch.
9. Check the tightness of the attachment regularly. If loose, pay attention to adjust in time, re-strengthen or renew the hanger.
10. According to the environment of the large-screen display screen and the control part, insect bites should be avoided, and rodent-proof drugs should be placed when necessary. lED display <br> <br> Second, the control part of the change, changes in Notes
1. The power line of the computer and the control part is zero, and the fire cannot be reversed. It should be plugged in according to the original position. If there are peripherals, after the connection is complete, test whether the chassis is powered.
2. When controlling equipment such as a mobile computer, check the connection line and the control panel for looseness before powering on.
3. Do not arbitrarily change the position and length of communication lines and flat connection lines.
4. If abnormalities such as short-circuit, tripping, burning, or smoking are found after moving, the power-on test should not be repeated and the problem should be promptly searched.
Third, the use of software operation precautions
1 software backup: WIN2003, WINXP, application programs, software installation programs, databases, etc. It is recommended to use "one-click restore" software, easy to operate.
2 Proficient in installation methods, raw data recovery, and backup.
3 master control parameter settings, basic data preset modifications 4 skilled use of procedures, operations and editing.
5 Regularly check* to delete unrelated data Non-professional staff, do not operate the software system.
Gear Motor,Ac Gear Motor,Hydraulic Gear Motor,Micro Gear Motor
LONG TERM ELEC. CO., LTD , https://www.longterm-hvac.com