“Be warmed up first to warm the feetâ€, and geothermal is being adopted by more and more families because of its unique advantages, so that the floors that are used exclusively for geothermal heat are gradually increasing. At present, only the "ground floor heating wood floor" industry standard for geothermal floors has no mandatory national standard. Lead to a variety of materials, a variety of new technologies, new concepts emerging, people difficult to distinguish between true and false. With regard to materials, thickness, pavement, cushions, etc., there are indeed more or less misleading claims from salesmen. So pure solid wood floor is good? Let's follow the Xiao Bian to learn more about it.
The misunderstanding of pure solid wood floor: pure solid wood floor can't be used for geothermal, and the floor used for floor heating is reinforced floor and solid wood floor.
Experts on this floor said that due to the geothermal environment, the floor needs to absorb certain amount of heat. When the moisture in the air is absorbed into the wood, the wood will expand. When the air is relatively dry, the moisture of the wood will run into the air. The wood shrinks. Ordinary solid wood flooring is susceptible to cracking and shrinkage and cannot be used in geothermal environments. The pure solid wood flooring that can be applied to geothermal environments is conditional and the production process is quite strict.
First, the harsh selection of tree species. For example, the average time for the production of rare wood in South America is the longest of all tree species. It takes at least 50 years to grow into “usable materialsâ€. For rare species such as peas and beans, they are required to be One hundred years. The long material time gives excellent materials, excellent stability, abrasion resistance, corrosion and corrosion resistance, and strong deformation resistance.
Second, the moisture content is strictly controlled and the moisture content in different regions is different. 
Third, it must be specially dealt with. The principle of paint on each floor is "six bottoms and three sides", so as to ensure the stability of the pure solid wood floor in all directions.
Fourth, technical patents guarantee the use of pure solid wood flooring in geothermal environments. For example, two representative patents in the industry, “hidden seam technology†and “gluing technologyâ€, have innovated pure solid wood geothermal flooring from two aspects of process and pavement, and have already extracted three in Beijing and Shanghai. The sample house installed in the previous year was tested very well.
“Hidden seam technology†is a reform of the concrete head through the concrete head, so as to effectively avoid the crack problem caused by the thermal expansion of the solid wood floor, and the floor can be freely retracted but the gap is still concealed. This technology is not subjective to suppress the expansion of solid wood, but to alleviate the adverse effects of this expansion, not only the natural nature of the solid wood floor has been maintained, the unfavorable factors of family paving can be eliminated. The "gluing and direct-laying technology" is the simplest and most effective technology for pure solid wood floor heating. It's like sticking a magic "double-sided tape" to the floor, without any damage to the floor. Through the principle of mechanics, the fastener tape is attached to the floor, and a close and organic adhesion system is established, eventually forming an overall pavement effect. This nail-free, glue-free, non-keel effect solves the problem of keel that is not suitable for geothermal floors.
Summary: After reading the above introduction, I believe we all know that pure solid wood flooring does not exist. It is recommended that you still buy laminate flooring and laminate flooring. Want to know more decoration knowledge, welcome to pay attention to this site information!
Buy materials nature floor del floor paint
Connecting rod bearings provide rotating motion of the crank pin within the connecting rod. The most common symptoms of a connecting rod bearing failure is a broken connecting rod piercing the crankcase; a problem that can be caused by bad rod bearings. A failed rod bearing will end up producing a metallic knocking or rumbling noise from the engine, especially during cold starts. Check our Online Automotive Spare Parts store for wide range of Connecting rod bearings for all car models. Our fast selling Connecting Rod Bearing includes Mahindra Scorpio Connecting Rod Bearing, Toyota Innova Connecting Rod Bearing, Volkswagen Polo/ Vento Connecting Rod Bearing, Tata Indica Connecting Rod Bearing and many more. In case of any query do get in touch with us.
Engines Connecting Rod Bearing,Connecting Rod Bearing,Con Rod Bearing For Engine,Auto Engine Con Rod Bearing
Shijiazhuang Longshu Mechanical & Electrical Equipment Trading Co., Ltd. , https://www.longsbearings.com