Gray iron castings are general engineering gray iron castings that are mainly used for tensile strength. The castings are graded according to the tensile strength of different casting bars. Gray cast iron castings for motor vehicles are gray cast iron castings suitable for use in sand casting, used in automobiles, tractors and related industries. What are the requirements for the hardness of gray cast iron castings for motor vehicles? Below, Xiaobian gives you a detailed description of the hardness requirements and specific instructions for gray cast iron castings for motor vehicles.
The order contract shall include the following terms:
* Whether special heat treatment is required.
* The surface on which the hardness test is performed.
* The required surface hardening depth and surface hardness.
Hardness requirements for grey cast iron castings for motor vehicles:
The foundry shall adopt the necessary control and inspection techniques to ensure that the casting meets the specified hardness range. Brinell hardness is tested according to ASTM E10 test method after the surface of the casting has been removed with sufficient thickness to ensure representativeness of the hardness reading. Unless otherwise agreed, 10 mm steel balls and 3000 kg load shall be used. The area of ​​hardness measured on the casting and its location shall be agreed between the supplier and the buyer and marked on the drawing.
Gray iron grade, hardness range, 10 mm steel ball, 3000 kg test force to obtain the number of millimeters of Brinell indentation diameter (BID) and metallurgy are as follows:
Brand | Hardness range of castings and diameter of Brinell indentation | Description |
G1800 G2500 G3000 G3500 G4000 | HB187 largest 4.4BID minimum or by agreement HB170-229 4.6—4.0BID or by agreement HB187-241 4.4-3.9BID or by agreement HB207-255 4.2—3.8 BID or by agreement HB217-269 4.1—3.7BID or by agreement | Ferrite - pearlite Pearlite - ferrite Pearlite Pearlite |
The grades and hardness requirements for the brake hub and clutch friction plate under heavy load are as follows:
Brand | Carbon, minimum % | Casting hardness and indentation diameter | |
G2500a G3500b G3500c | 3.40 3.40 3.50 | HB170-229 4.6-4.0BID or by agreement HB207-255 4.2-3.8BID or by agreement HB207-255 4.2-3.8BID or by agreement |
Note: Alloy grey iron motor camshaft grade is G4000d, casting hardness - according to the agreement between the supplier and the buyer, the hardness measured on the support surface is 241-2321HB.
Concerned about surprises
Tagged with: Casting Gray iron Pearlite Indentation diameter Factory shop
Previous: How to buy a quenching furnace? Next: Home decoration save money, four strokes to control the cost of wooden door painting
Elevator Traction Machine Kits And Packages
China leading manufacturers and suppliers of Elevator Traction Machine Kits And Packages,Elevator Traction Machine Packages, and we are specialize in Traction Machine,Elevator Traction Machine Kits, etc.
Traction Elevators are lift systems that use an electric hoisting machine and hoisting cables to raise and lower the elevator car vertically along guide rails. Traction Elevators are a common system for many mid-rise and high-rise structures and require a penthouse machine room to store the mechanical equipment and a counterweight to balance the load placed on the machinery by the car and passengers. Traction Elevators come in two types, geared and gear-less, that differ based on if a gearbox is attached to the motor.
Our company is among the most sought after offering Geared Traction Elevator to the clients. Geared Traction Elevator is manufactured under the administration of our professionals by utilizing the superior quality material.
Elevator Traction Machine Kits And Packages,Elevator Traction Machine Packages,Traction Machine,Elevator Traction Machine Kits
Suzhou Keffran Parts Co.,ltd , https://www.keffran-elevatorsmart.com