I. INTRODUCTION With the development of our country's industry, the scale of many enterprises has been continuously expanded, and the number of boilers providing power sources has also increased. However, there are very few proficient proficiency in boilers in the non-boiler industry. Those proficient in boiler auxiliaries Less, which gives enterprises in the selection of boiler auxiliary machinery to bring some difficulties, in order to avoid the selection of equipment in the practical application will not be a big deviation, the following only to the boiler feed pump several proposed Simple and applicable methods and precautions. Second, the boiler feed pump to determine the parameters (1) feed water pump flow calculation Q = k (Q1 + Q2) Where: Q-boiler feed pump flow, m3 / h; Q1- Water supply, m3 / h; Q2 - other water consumption, such as continuous sewage, regular sewage and desuperheater, m3 / h; k- standby factor 1.1 ~ 1.2. (2) Boiler feed pump head calculation H = H1 + H2 + H3 + H4 Where: H-boiler feed pump head, m;
TCT Hole Saw
Our Tungsten Carbide Tipped Cutters(TCT hole saws) are a superior alternative to conventional Bi-Metal Hole saws. They cut faster, cleaner, and last longer. Say goodbye to burnt out, smoking holesaws. Try a T.C.T. you'll love it.
Tungsten cutters cut through, steel plate, iron, aluminium, copper, cast iron, and most importantly, stainless steel and other tough alloys.
The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws.
T.C.T. cutters are the standard for electrical construction, transit work and general metal fabrication. The spring on the pilot bit ejects the cut slug.
With normal care, Tool life is significantly longer than other hole cutting tools. Inexpensive resharpening will allow repeated use
Tct Hole Saw,Tct Cutting Disc,Carbide Circular Saw Blade,Tct Hole Saw Cutter
Behappy Crafts (suzhou)Co.,Ltd , https://www.behappyindustry.com