The tone of the floor and wall echoes. The fine texture of the floor is in harmony with the simple decoration style. The overall effect is elegant and generous. The blankets laid on the floor bring some natural flavor to the refined interior design. Different types of wood floors have different selection methods. In addition to requiring businesses to provide formal inspection reports, we can also conduct inspections with simple methods.
Yangzi floor Zhongchao floor
It should be noted that some display methods in the building materials market are not credible, such as immersing the material in water to show that the waterproof is not deformed. This is actually misleading. In fact, all wooden floors cannot be soaked in water. Although the material will be immersed in water during the destructive test of quality inspection, this does not mean that the wood floor we purchased can withstand long-term immersion.
In order to adapt to the needs of daily life, wooden floors have been waterproofed, but wooden floors still cannot withstand more severe soaking. Because the internal cell structure of wood determines its characteristics of wet shrinkage and shrinkage, but the shrinkage coefficients of different floors are different, so all wooden floors should be prevented from being immersed in water. The so-called “not afraid of water†does not mean “not deformingâ€.
1, poor water resistance and water resistance will cause significant expansion around the floor, causing the floor to arch. Moisture content is an important factor directly affecting the dimensional stability of the floor. Usually the moisture content of the wooden floor should be consistent with the local moisture content. Otherwise, the floor will have different degrees of dimensional changes when the environment changes, so we should pay attention to the Whether the moisture content of the selected floor meets the requirements of the national standard.
2, flame retardant Because of the flame retardant properties of wood flooring can not be asked too high, a simple test method can be placed on the surface of the floor with a cigarette, to be burned after the end of the floor is not burnt out irremovable marks such as no cracks, black Spots and blisters indicate that the flame-retardant properties are satisfactory.
3. Glued solid wood flooring uses natural wood without any bonding treatment. Solid wood composite flooring is made of hot-pressed adhesive coated board surface, so the adhesive performance is an important quality indicator of the product and will directly affect the product's function and life.
4, formaldehyde content solid wood flooring and laminate flooring in the adhesive contains a certain amount of formaldehyde, it will gradually release to the surrounding environment in a gaseous form, when people in a high concentration of formaldehyde, the eyes, nose and respiratory tract will Discomfort occurs and endangers your health.
5. Abrasion resistance Laminate flooring has good abrasion resistance because it has a wear-resistant layer on its surface. The 6000-18000r that we saw in the product description indicates the wear resistance, which also corresponds to its wear-resistance. The content of corundum abrasive in the layer. National standards stipulate that products above 6000r are suitable for home use, but in public places must be above 9000r.
6, paint processing and strengthen the wood floor is different, solid wood flooring and solid wood floor board after the paint processing, selection should check the paint surface should be uniform, smooth, smooth. No paint leakage, no bubbles, no cracks.
Link:Yangzi Floor Takes You A Full Look At The Purchase And Laying Of Laminate Flooring
Flooring purchase paint formaldehyde interior decoration home decoration building materials market decoration style
Screwdrivers,Phillips Screwdriver,Screwdriver Set,Small Screwdriver
YUCHENG COUNTY YONGHENG MEASURING TOOLS CO.,LTD , https://www.sqyhtools.com