ã€China Aluminum Industry Network】 Summer arrives, and many household items need careful maintenance. Otherwise, in the wet summer, it is easy to produce bad changes and affect the service life. The same is true for aluminum doors and windows in homes, and it needs good maintenance. Xiao Bian provides 7 coups to help you maintain aluminum doors and windows in summer.
Aluminum alloy doors and windows have a coup 1. Aluminum alloy doors and windows in use, the action should be light, push and pull along the way; find it difficult to hard pull hard push, should be troubleshooting. Accumulation of dust, deformation is the main reason for the new aluminum doors and windows to pull out the difficulties, to keep the door frame clean, especially the push-pull tank clean. Vacuum cleaner can be used to suck the dust in the groove and door seal tops.
2. When cleaning aluminum alloy doors and windows, people do not step on the aluminum frame, and do not pull the frame for support.
3. Aluminum doors and windows can be used soft cloth dipped in water or neutral detergent, do not use ordinary soap and detergent, but can not use detergent, toilet detergent and other strong acid and alkali cleaners.
4. After the rainy weather, the wet glass and door frames should be wiped out in time, paying particular attention to draining the chute. If the chute is used for a long time, the friction force is increased. Add a little oil or a layer of wax oil.
5. Always check the connections of the aluminum alloy frame, tighten the bolts in time, and replace the damaged parts. Positioning pins, wind braces, floor springs and other vulnerable parts of aluminum alloy doors and windows, should be checked from time to time, regularly add oil to keep clean and flexible.
6. Sealing tops and glass seals are the key structures that ensure the heat insulation of doors and windows. If any, they must be repaired and replaced in time.
7. Always inspect the joints of the aluminum alloy frame wall. If it loosens for a long time, it can easily deform the frame as a whole, and the door and window cannot be closed and sealed. Therefore, loosening of the screws at the joints should be fastened immediately, such as loosening of the screw footings, and application of epoxy glue to adjust a small amount of cement.
Elevator Ventilating Fan,Elevator Exhaust Fan,Industrial Exhaust Fan,Best Elevator Ventilating Fan
MAURER TECHNOLOGIES CO., LTD. , https://www.maurer-elevator.com