One mistake: the operation area is not arranged properly
Owner's experience: The sink of my kitchen is less than 10 cm away from the side wall, and next to the stove, there is almost no place for the board to operate. To make a dish, wash the vegetables on the right side of the stove, then cut the vegetables on the left side of the stove, and go back and forth, especially not easy. Originally, the water pipes and gas pipes of the house were stacked together on the wall. When the cabinet company designed it, the stoves and sinks were installed directly adjacent to the pipes. I really regret that I didn't take these details into consideration at the beginning, which caused the situation that is now awkward.
Expert comment: To solve this problem fundamentally, you may have to change the pipeline and change the countertop.
When decorating the kitchen, it is necessary to emphasize the practicality. It is necessary not only to arrange the operation area in combination with the operation process, but also the height of the table, the height and thickness of the cabinet, the brightness of the light, etc., and must be adjusted according to the specific needs of the owner. The opinions of the “chef chef†at home are very important, and they should communicate with the cabinet designer as much as possible after considering the whole situation.
Second mistake: unrealistic pine table
Owner's experience: In the decoration, in order to pursue my favorite rural style, the cabinets are designed to be open, without cabinet doors, covered with coarse linen curtains, the countertops of the cabinets also give up the finished countertops, and the rustic ones are chosen. Pine boards, let the workers splicing and installing on the spot, and finally brush the waterproof paint on the table. I thought that waterproofing should be no problem, but it may be because pine is a solid wood material, it will inevitably have moisture, and will gradually shrink after dehydration, resulting in more and more cracks in the place where the countertop is handed over. The glue does not help, and when there is When water is accumulated, the water seeps into the cabinet. Now I can only replace the table to solve the problem.
Expert comment: The surface of the pine board looks very cool, but after all, the kitchen countertop is the place that touches the most water, and the wood is a material that is relatively easy to absorb water, so cracking deformation is a matter of time. Nowadays, the design style of the country style is strong, so the materials of this style in the building materials market are correspondingly more and more complete, you can choose the right material to replace the solid wood. The practicality and beauty in the decoration is always a contradiction, but as long as the materials are selected, the contradiction can be balanced.
Three mistakes: the range hood is not used
Owner experience: I am a full-time housewife. When the new home is renovated, the kitchen is my most troublesome. My family's kitchen is an imported brand with a beautiful appearance and full functionality. The only regret is that I chose an ultra-thin flat-top range hood. At that time, it was in the shape of it, but now it is found that its smoking ability is too weak. When I have a meal, the taste in the kitchen is particularly large, and I can't get away for a long time. I want to change the range hood and it is too much trouble. If I don't change it, I can't solve the problem of big smoke, which makes me very upset.
Expert Comments: Indeed, the flat body design is simple and stylish. Although the price is high, it is still very popular in the market. However, it is not suitable for Chinese cooking, frying, cooking, and frying. Because the hood is too shallow or there is no hood at all, the fumes that are too late to be pumped out are severely spread. Over time, greasy will adhere to the cabinet or wall.
To solve this problem, I suggest you change the deep hood type range hood. These models include deep or deep cabinets, all with a deeper (larger volume) hood. When the fan runs at a high speed, a certain negative pressure zone is formed above the collecting hood to accommodate the soot that is too late to be pumped, which acts as a buffer, thereby eliminating the phenomenon of a large amount of oil spillover.
Office Table executive desk office workstation
We are the Office Furniture manufacturers in China and can provide you with professional office furniture. A variety of different styles are available.
Quick Details
General Use:Office Furniture
Application: Office, Living Room, Hotel, Office Building,Apartment, Hospital, School, Mall, etc.
Design Style:Modern
Material:Wooden
Wood Style:Melamine Board
Place of Origin:China
Style:Morden
FEATURE:ADJUSTABLE
Certificate:ISO9001
Design: SIMPLE DESIGN
APPEARANCE:FASHION
Conference table combination, easy office, a variety of styles to choose.
Classic and many optional, simple and fashionable and more durable.
Our company is engaged in foreign-related business, cooperative production, export and other forms of business, mainly engaged in office furniture, living room furniture, hotel furniture, etc. Because the custom furniture pays attention to the combination of practical application and art. We will, as always, fight for a better future! Today, as our business grows, we have good standing in Spain, Turkey, Poland, Germany, Italy, Russia and Australia. Great to see you in the international market.
Boss Table,Filing Cabinet,Office Workstation,Conference Table
FOSHAN CITY LESHUN RONGHUI FURNITURE CO.LTD , https://www.ronghuifurniture.com