According to the relevant personnel, due to the special characteristics of the geothermal floor and the complexity of the geothermal system, compared with the ordinary floor, the maintenance and maintenance of the geothermal floor has its own unique features, and special attention should be paid to heating and moisturizing.
Floor insulation should be paid attention to during installation
When using geothermal floor, consumers must pay attention to the floor and floor heating step by step.
When installing, the surface temperature should be kept at around 18 °C. Before installation, the cement floor should be gradually heated up, increasing by 5 °C every day until it reaches the standard of about 18 °C. In the first 3 days after the installation is completed, this temperature should be maintained. After 3 days, the temperature can be raised as needed, and the temperature can only be raised by 5 °C per day.
Note that heating should be gradual
The first time you use geothermal heating, be careful to heat up slowly. When used for the first time, the first three days of heating should be gradually warmed up: the first day water temperature 18 ° C, the next day 25 ° C, the third day 30 ° C, the fourth day can be raised to normal temperature, that is, water temperature 45 ° C, surface temperature 28 °C ~ 30 °C. Can not heat up too fast, too fast, the floor may be cracked and twisted due to expansion.
It will be enabled again after a long time, and the heating should be step by step.
When the geothermal heating system is activated again after a long time, it should be heated as strictly as the first time.
The surface temperature cannot be too high
It should be noted that with geothermal heating, the surface temperature should not exceed 28 ° C, and the water pipe temperature should not exceed 45 ° C. If this temperature is exceeded, it will affect the service life and service life of the floor. The average family, when the room temperature reaches 22 °C in winter, is already very comfortable. If the temperature rises normally, it will not affect the use of geothermal floor.
Turn off the geothermal system, pay attention to the gradual cooling
As the seasons go through, when the weather is warm and the indoor heating system is no longer needed, it should be noted that there is also a process to shut down the geothermal system. The cooling process of the floor should be gradual and not dip. If the cooling rate is too fast, It also affects the life of the floor.
When the room is too dry, consider humidifying
The winter climate is dry, coupled with the use of geothermal heating, the floor is prone to dryness when the temperature is high for a long time. At this time, the owner needs to humidify the room to avoid dry deformation of the floor, and the moisturizing can not be ignored.
Polyester window screen is a kind of window screen made of polyester yarn. It's a popular alternative to traditional fiberglass screens because it's more durable, more resistant to tearing, and less likely to dent or wrinkle. Polyester screens are also more resistant to moisture, heat and UV rays, making them ideal for outdoor applications. Polyester window screens are available in different colors and mesh sizes to suit different needs and preferences. They are easy to install and maintain, and can be cleaned with simple household tools. Polyester window screens are widely used in homes, commercial buildings and industrial settings. They provide a clear view of the outdoors while keeping insects and pests out and also help filter dust and allergens from the air. Also, polyester window screens are eco-friendly as they are made from recycled materials and can be easily reused or recycled.
Polyester Insect Screen,Mesh Belt Dryer,Polyester Pleated Insect Screen,Polyester Fabric Roll
wuqiang huihuang fiberglass factory , https://www.hh-windowmesh.com