The purchase of floor tiles is very particular. If the floor tiles are laid up again, the consequences will be very serious. Your time, money and energy will be consumed. The following questions should be paid attention to before the floor tiles are laid, and teach you the most cost-effective and most convenient way to buy bricks.
1. What is the paving?
This problem is the most basic. First of all, you have to fully understand which spaces are suitable for which tiles! In fact, the key to this problem is not what to use, but how to mix various materials. For example, some owners want to lay tiles in the living room and choose wooden floors in the bedroom. The problem arises: if the living room is covered with ordinary vitrified tiles and the bedroom is covered with laminate flooring, there will be a height difference of about 3 cm between the bedroom and the living room. This is mainly due to the fact that there is no keel under the reinforced floor. So is it right to choose solid wood flooring in the bedroom? Of course not. Usually the solid wood floor is installed by the manufacturer and will use 3×2cm keel. If it is best to use the keel of 5×4cm in order to level the tile in the living room, the service terms of the various floor manufacturers may be different for the replacement of the keel.
Therefore, we must fully communicate with the owners. After all, our aim is to satisfy the owners, understand the most basic requirements of the owners, and then find the most suitable solution based on the original ideas of the owners. If the owner wants to choose the way the floor and floor tiles are mixed, it must be planned to avoid unnecessary trouble. The following two basic matching methods are introduced: tile + laminate floor = room with floor plastering with cement mortar 3cm, tile + solid wood floor = 5x4cm keel under the floor.
2. What size tiles are selected?
Is it 600? 800? Or 1000 or other specifications? This is a problem! The current floor tiles, especially the floor tiles used in the living room are mainly 500mm, 600mm, 800mm and 1000mm (ie 1m) and other specifications, among which The most used are 600mm and 800mm. So how do you choose? It is recommended to choose according to the area of ​​the paving and the placement of the furniture. Since the 600mm bricks per unit area are more than the 800mm bricks, the spatial expansion can be visually produced, and the scrap rate when paving the corners is lower than 800mm, while the space is 800. Even a brick of 1 meter size is atmospheric. Therefore, it is recommended to select a 600mm floor tile for a space of less than 40 square meters, and 800mm or a meter of floor tiles for a space of more than 40 square meters. It is worth noting that if there is too much furniture in the room (such as the bedroom), it is best to use 600mm floor tiles when covering large blocks.
Henan liangjin tools co.,Ltd is located in Shangqiu City, Henan Province. The site area of the economic and Technological Development Zone covers an area of more than 30000 square meters, a construction area of more than 3000 square meters, a greening area accounting for more than 30% of the total area, and a design annual production capacity of 30 million rolls of paper, With 10 million screwdrivers, 6 million wrenches, 3 million art knives and 100000 sets of combined tools,specialize in the production of steel tape,tape screwdrivers,art knives,measuring tools,fine tape types of three meters,five meters,seven meters ,five meters,ten meters,as well as double-sided printing tape matte sanding,bright tape.
Steel Tape,Metal Tape Measure,Retractable Tape Measure,Clothing Measuring Tape
Henan Liangjin Tools Co.,Ltd , https://www.jtapemeasure.com