When to enter the installation phase
1. Installation of woodworking hardware items We know that most wood products need to consider the problem of paint. Therefore, the installation time of the hardware needs to consider the connection with the construction of the painter. This needs to be considered from two aspects. First, the installation time of the hardware cannot be arranged too early. Otherwise, the painter needs to consider the protection of the hardware too much during the construction; second, when installing the hardware, Care must be taken not to damage the construction that the painter has already completed. Therefore, normal construction is often arranged in such a way that the hardware that needs to be drilled is basically completed before the painter works or before the main process is performed (such as the keyhole before the door lock is installed is basically at this stage To proceed, the drill hole is preferably arranged at this stage). After the painter has completed the construction, the woodworker will perform the installation work.
2. Electrical lamps and switch socket panel installation:
After the work of painting or wallpapering on the wall, the installation of the lamps and the installation of the switch socket panel should be performed. There have been instances when a company was working to save personnel expenses, so that the electricians installed the switch sockets prematurely in the process schedule. As a result, the paint workers behind the wall did not pay attention to protecting the switch sockets. When the socket panel was opened and closed, the panel was inadvertently scratched.
3. Sanitary ware and bathroom hardware installation:
As the overall management level of our current home improvement industry is still very low, the quality of workers on the construction site is generally poor. Therefore, on some construction sites, there have been a number of phenomena where the installed bathtub was used first by construction personnel. In recent years, there have been many cases of complaints in this area. Therefore, I recommend that consumers, unless forced to do so, should not install sanitary ware before the project begins acceptance and most construction workers have not evacuated the site. Otherwise, it is very likely that the hair left after bathing will be found in a brand new bathtub.
â– How to supervise the installation work of workers
1. Check the installation tools of construction workers Generally speaking, the construction personnel who often do installation work in a certain area, most of his tool kits will have special tools, even if these tools are his own production, use it more than just find a tool Handy. Such as the necessary hand hammer, special screwdriver, various drills and so on. Workers who are temporarily caught by the foreman and work as a worker will generally have no easy tools in their hands. Instead of picking anything at hand, they are looking for Zhang Sanli to borrow. Of course, the job is definitely not much better.
2. Checking whether the dress code of construction workers conforms to the safety regulations Because some aspects of the current home improvement industry are not yet standardized, some strict practices are required in public works, and it is difficult to see them on home improvement sites. For example, strict demands are placed on electricians in public works. Insulation shoes must be worn, but there is no such requirement on the home improvement site, but even so, workers, especially electricians, must not wear slippers or light upper body when working. Otherwise, they are a bit too bad.
3. In accordance with the product specification, supervise the worker's operation to meet the requirements:
Specific to each installation project, limited to the length of this article, I will specifically introduce later. If you are in a hurry to understand some professional knowledge, you can supervise the operation of construction personnel according to the relevant regulations in the product specification. In these instructions, often draw some easy-to-read drawings, and related instructions, I believe that for most consumers is a certain help. â–
Hardware paint switch socket home improvement bathroom
Manufacturing Industry Lighting
Industrial lighting is a lighting solution designed specifically for manufacturing environments. In the manufacturing industry, a good lighting solution is essential to improve production efficiency, ensure work safety and create a comfortable working environment.
Manufacturing lighting needs to meet a range of specific needs. First, there are high lighting requirements for factory lighting, because manufacturing environments often require a lot of light to ensure that employees can see details clearly when carrying out assembly, inspection, and other tasks. Second, reliability and durability are key, as manufacturing environments can have harsh conditions such as dust, vibration and high temperatures. Therefore, it is very important to use production lighting equipment with high impact resistance, dustproof, waterproof and other characteristics.
LED lighting technology has been widely used in warehouse lighting. LED lamps have the advantages of high brightness, long life, low energy consumption and low maintenance costs, which can provide efficient and reliable lighting solutions for the manufacturing industry. In addition, the intelligent control system can achieve dimming and color temperature and other functions, according to different work needs to flexibly adjust, improve energy efficiency.
Through rational planning and application of manufacturing lighting solutions, production efficiency, quality control and employee safety can be improved. Proper lighting reduces eye strain, improves accuracy, and ensures that employees can operate safely during the course of their work. The design of manufacturing lighting should consider factors such as environmental characteristics, task requirements, energy efficiency and reliability to create a safe, efficient and comfortable manufacturing environment.Manufacturing Lighting, Factory Lighting, Production Lighting, LED Lighting Technology, Warehouse Lighting
SHENZHEN LITEHOME OPTOELECTRONIC TECHNOLOGY CO., LTD. , https://www.litehomelight.com