Nowadays, a new kind of acrylic bathtub has been gradually recognized by consumers. However, there are three kinds of acrylic plates in the domestic market: acrylics for sanitary ware, ordinary acrylics and acryl composites. The latter two materials are actually not suitable for making bathtubs due to their own defects in the material. Bathtub and other sanitary ware.
Acrylic chemical name methyl methacrylate, "organic glass." The special acrylic plate used for sanitary ware has excellent surface smoothness, its wear resistance is equivalent to aluminum, and it is not easy to rub and easy to clean. If accidental scratches on the surface occur, the polishing agent can be quickly and conveniently trimmed and removed. Because the plate itself has a certain elasticity, even if the surface is subjected to a certain impact, it is not easy to crack or crush.
In addition, the acrylic plate for sanitary ware has strong corrosion resistance and light transmittance, and since the pigment can be dissolved into the plate, the color is very stable, and the long-term light and rain is not easy to fade. Therefore, besides being used for indoor and outdoor decoration, acrylic exclusive acrylic plates are also widely used in other industries.
Because of its low hardness, poor heat resistance, and low elongation, ordinary acrylic sheets are easily cracked, brittle, easily deformed, and unstable in color. It is prone to fluffing during use. The molded bathtub is generally due to the large bottom stretch, which is prone to color changes. Usually, the bottom corner has “color white†and “yellow†discoloration.
ABS acrylic composite board is made of ABS board bonded on both sides of acrylic composite board. Therefore, its adhesive layer is easily observed at the cutting edge (ie, the edge) of the sanitary fixture. Because the ABS acrylic composite board is formed by bonding two different materials, it results in inconsistent shrinkage. After long-term cold and heat changes, it is easy to produce delamination. Again, because the surface of the ABS plate is only a few millimeters thick acrylic, its stability and wear resistance are poor, and it is easy to produce “white†or other discoloration when molding.
Plate Bathtub Interior Decoration Glass
Changzhou Longfu Knitting Co., Ltd. , https://www.circularmachine.com