This is a bold attempt. It is also the third creative video wall of my design. It is also a rotation, but it is different. The first time I met was a bedroom. I was a long strip, so I designed it in the room. The wall, the TV can rotate, is rotated in the middle of the new wall, and the second is electric rotation.
This time, the situation is different. The front and back of the wall are the living room and the dining room. The owners like to watch TV news when they eat. In the spirit of energy saving and environmental protection, the rotating video wall is designed and manufactured. Reflecting environmental protection, too much television radiation is large, can not reflect the environmental protection, the second is to consider energy conservation, a dual-purpose machine, environmental protection and energy conservation.
During the production and construction, some troubles were encountered. The walls were separated from each other. Half of the light walls were half load-bearing walls. The load-bearing walls were covered with steel bars. Workers found a lot of steel bars after breaking the load-bearing wall. They must not be dismantled. So only re-consider the plan, desperation produced a new program.
The construction of rotating video walls is actually not complicated, and good construction workers can produce them. The so-called complicated places are mainly in the design aspect. This is based on the actual position and scene of the wall. The rotation shown on this photo will be considered. The TV stand is different from what I have done in the past, because half of this wall is a light wall and the other half is a load-bearing wall. In desperation, it changed the original design and positioned the rotation at 180 degrees.
Now introduce the production method to everyone:
1. Determine the size, shape, weight and normal installation method of the LCD TV;
2, according to the above data to find suitable materials, bearings, steel, 4mm-5mm steel expansion bolts, welding tools and other materials;
3, wall holes, (to be larger than the actual TV, especially the spacing between the upper and lower) to prepare for the fixed rotating frame,
4, welding, welded on the two ends of the bearing on the steel tube, pay attention to the deformation of the bearing after heating will affect the late rotation, in addition to pay attention to the balance of the bearing and steel pipe, and then welded on the steel plate and support the link plate, pay attention to balance,
5. Welded steel pipe in the bearing core, welded steel plate on one side of the steel pipe, and open hole (used when the expansion bolt is fixed)
6, after the completion of welding can be fixed rotating frame, the upper and lower ends of the flange plate with expansion bolts fixed in the middle of the wall, pay attention to the measurement of balance and level, and then the cement mortar covering the base and the upper fixed top steel plate,
7, test the flexibility and level of the rotating frame, which completes the fixation of the shelf,
8, in the steel plate in a fixed position on the fixed rack, hang LCD TV, again test the rotation balance, to ensure no problem with putty putty putty, spray paint.
9. Make television frames, paint finishes, and decorations with decorative panels.
The above steps with the picture, I believe you will explore the successful production, in fact, the production cost of the shelf is not too high, 200-300 yuan is enough. Tell everyone again that the power line, network cable, and TV line must pass through the hall. Only the right part of the riser pipe can be opened. The hole should not be too small, and the power plug can pass through properly. Pay attention to the hole opening. It is necessary to have an edge-sealing material that prevents long-term friction of the wire, to prevent long-term rotation of the worn wire.
539) {this.resized=true; this.width=539;}" border=0>
539) {this.resized=true; this.width=539;}" border=0 resized="true">
539) {this.resized=true; this.width=539;}" border=0 resized="true">
539) {this.resized=true; this.width=539;}" border=0 resized="true">
539) {this.resized=true; this.width=539;}" border=0>
539) {this.resized=true; this.width=539;}" border=0 resized="true">
539) {this.resized=true; this.width=539;}" border=0 resized="true">
539) {this.resized=true; this.width=539;}" border=0 resized="true">
539) {this.resized=true; this.width=539;}" border=0 resized="true">
539) {this.resized=true; this.width=539;}" border=0 resized="true">
539) {this.resized=true; this.width=539;}" border=0 resized="true">
539) {this.resized=true; this.width=539;}" border=0 resized="true">
539) {this.resized=true; this.width=539;}" border=0 resized="true">
539) {this.resized=true; this.width=539;}" border=0 resized="true">
539) {this.resized=true; this.width=539;}" border=0 resized="true">
539) {this.resized=true; this.width=539;}" border=0 resized="true">
539) {this.resized=true; this.width=539;}" border=0 resized="true">
This time, the situation is different. The front and back of the wall are the living room and the dining room. The owners like to watch TV news when they eat. In the spirit of energy saving and environmental protection, the rotating video wall is designed and manufactured. Reflecting environmental protection, too much television radiation is large, can not reflect the environmental protection, the second is to consider energy conservation, a dual-purpose machine, environmental protection and energy conservation.
During the production and construction, some troubles were encountered. The walls were separated from each other. Half of the light walls were half load-bearing walls. The load-bearing walls were covered with steel bars. Workers found a lot of steel bars after breaking the load-bearing wall. They must not be dismantled. So only re-consider the plan, desperation produced a new program.
The construction of rotating video walls is actually not complicated, and good construction workers can produce them. The so-called complicated places are mainly in the design aspect. This is based on the actual position and scene of the wall. The rotation shown on this photo will be considered. The TV stand is different from what I have done in the past, because half of this wall is a light wall and the other half is a load-bearing wall. In desperation, it changed the original design and positioned the rotation at 180 degrees.
Now introduce the production method to everyone:
1. Determine the size, shape, weight and normal installation method of the LCD TV;
2, according to the above data to find suitable materials, bearings, steel, 4mm-5mm steel expansion bolts, welding tools and other materials;
3, wall holes, (to be larger than the actual TV, especially the spacing between the upper and lower) to prepare for the fixed rotating frame,
4, welding, welded on the two ends of the bearing on the steel tube, pay attention to the deformation of the bearing after heating will affect the late rotation, in addition to pay attention to the balance of the bearing and steel pipe, and then welded on the steel plate and support the link plate, pay attention to balance,
5. Welded steel pipe in the bearing core, welded steel plate on one side of the steel pipe, and open hole (used when the expansion bolt is fixed)
6, after the completion of welding can be fixed rotating frame, the upper and lower ends of the flange plate with expansion bolts fixed in the middle of the wall, pay attention to the measurement of balance and level, and then the cement mortar covering the base and the upper fixed top steel plate,
7, test the flexibility and level of the rotating frame, which completes the fixation of the shelf,
8, in the steel plate in a fixed position on the fixed rack, hang LCD TV, again test the rotation balance, to ensure no problem with putty putty putty, spray paint.
9. Make television frames, paint finishes, and decorations with decorative panels.
The above steps with the picture, I believe you will explore the successful production, in fact, the production cost of the shelf is not too high, 200-300 yuan is enough. Tell everyone again that the power line, network cable, and TV line must pass through the hall. Only the right part of the riser pipe can be opened. The hole should not be too small, and the power plug can pass through properly. Pay attention to the hole opening. It is necessary to have an edge-sealing material that prevents long-term friction of the wire, to prevent long-term rotation of the worn wire.
539) {this.resized=true; this.width=539;}" border=0>
539) {this.resized=true; this.width=539;}" border=0 resized="true">
539) {this.resized=true; this.width=539;}" border=0 resized="true">
539) {this.resized=true; this.width=539;}" border=0 resized="true">
539) {this.resized=true; this.width=539;}" border=0>
539) {this.resized=true; this.width=539;}" border=0 resized="true">
539) {this.resized=true; this.width=539;}" border=0 resized="true">
539) {this.resized=true; this.width=539;}" border=0 resized="true">
539) {this.resized=true; this.width=539;}" border=0 resized="true">
539) {this.resized=true; this.width=539;}" border=0 resized="true">
539) {this.resized=true; this.width=539;}" border=0 resized="true">
539) {this.resized=true; this.width=539;}" border=0 resized="true">
539) {this.resized=true; this.width=539;}" border=0 resized="true">
539) {this.resized=true; this.width=539;}" border=0 resized="true">
539) {this.resized=true; this.width=539;}" border=0 resized="true">
539) {this.resized=true; this.width=539;}" border=0 resized="true">
539) {this.resized=true; this.width=539;}" border=0 resized="true">
TV Villa Design TV Wall Paint Decor Living Room TV Interior Design Living Room TV Wall Picture Bedroom Picture Picture Living Room Picture Cubicle
Kitchen Faucets With Sidespray
Kitchen Faucets With Sidespray,Kitchen Faucets With Sidespray Price,Kitchen Faucets With Sidespray Product
Yuyao Zelin Sanitary Ware Co., Ltd , https://www.zelinsinkfaucet.com