Home>Bearing knowledge>What kind of work does the demand for radial bearing clearance?

/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

What kind of work is required to measure the radial clearance of bearings?

---

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

(1) Select the special instrument measurement method as much as possible, (2) Use the hand push method to measure the demand measurement. The measurement method has a higher measurement technique. This method has a large measurement error; especially when the clearance is in the marginal condition; the simple error causes the moment; ; should be measured by the instrument,
(3) When measuring the feeler; it shall be operated according to the rules of the standard; it shall not be measured by rolling the roller from the feeler;
(4) During the measurement process, ensure that the ball falls into the bottom of the ditch; the closed bearing is measured before closing; when the instrument is loaded, the measured value should also be reduced by the load.
(5) Regarding multi-row bearings; the required clearance for each column is qualified; the arithmetic mean of each column clearance is taken as the radial clearance of the bearing.

---

Recommend to friends comments close window

Bearing related knowledge

The main problem of the ceramic cage and the zirconia all-ceramic bearing sliding bearing is the wear of the outer surface of the bearing. The reason and countermeasures of the imported needle roller bearing layout and characteristics of the hydraulic excavator working equipment shaft and bearing depiction (2)

This article links to http://
Please indicate China Bearing Network http://

Previous:High temperature magnetic data - the key to magnetic bearings Next:The difference between oscillating SKF bearing and general type

Measuring Tape

Measuring Tape,Small Tape Measure,Custom Tape Measure,Personalized Tape Measure

SHANGQIU CHAOYUE MEASURING TOOLS CO., LTD , https://www.equipmentool.com