1. If it is a small area of ​​water, it is recommended not to pick up the laminate floor to dry, so it is easy to cause hard damage to the laminate floor, which may cause serious consequences that cannot be restored. It is best to quickly remove the baseboard of the floor, reveal the expansion joints, and disperse the water vapor through the expansion joints. It usually takes about three to ten days to dry depending on the amount of water seepage.
2. The wooden floor is soaked in water, and the surface water on the wooden floor should be drained in the shortest time. At the same time, take the vacuum cleaner to absorb the water vapor in the splicing gap of the water-repellent wood floor, or use a hair dryer to blow dry with cold air, but never use hot air to prevent the surface from being dry-deformed due to heat drying.
3. If it is a large area of ​​soaking water, the floor after-sales service should be notified in time, and the floor should be carefully picked up while keeping the floor as far as possible, and placed in a “well†shape to dry and dry. The weight prevents the occurrence of deformation, and at the same time, it should not be exposed to the sun. It should be placed in a ventilated place and dried. Generally, the solid wood floor with good quality can be used again.
4, you can also take the vacuum cleaner at the splicing gap of the water floor to absorb the water vapor, or take the hair dryer to blow dry with cold air, but do not use hot air to prevent the surface from being dry and deformed due to heat drying.
5, after the rescue is passive, after all, it is the best choice. Usually pay more attention to the windows do not open up, to prevent rain; often check air conditioning, plumbing and washing machine leaks. The current floor wax mainly plays a role of cleaning and maintenance, and can not be completely waterproof; there are some floor protection films on the market, like a transparent coating, not sticky, waterproof and scratch resistant, which is used longer than the floor wax, eliminating the need to change shoes at home. Trouble.
6. It is best to replace the floor with the water-up and deformation. It is not recommended to plan the part of the arched and repainted. Because the arched part is leveled, repainting will result in no other color. Coordination, and the entire board is uneven in thickness, the force is different, and pits are prone to occur.
Farwise Technology Co.,Ltd. , https://www.farwiselighting.com