Gas pump working conditions and the scope of application

【Asia Pump Network News】 also known as gas-liquid mixing pump vortex pump, gas-liquid pump, ozone water mixing pump, air pump, air-water mixing pump, air pump, aeration pump, dissolved pump. The use of gas-liquid mixing pump, can improve the efficiency of dissolved gas solution to simplify the preparation of equipment, save space, significantly reduce the initial investment, save operating costs and maintenance costs. Now let's talk about the working conditions of liquid pump and its application. Gas-liquid pump First, the gas-liquid mixing pump Overview Gas-liquid mixing pump suction port can take advantage of negative pressure suction gas, so no need to use air compressors and air ejectors. Pump impellers that rotate at high speeds mix liquid and gas, eliminating the need for mixers and mixers. Due to the pressure mixing inside the pump, the gas and liquid are fully dissolved, and the dissolution efficiency can reach 80-100%. So do not need a large pressurized dissolved gas tank or expensive reaction tower to obtain a high degree of solution. Second, the gas-liquid mixing pump working conditions Thin, clean, low viscosity or fine impurities containing liquid; liquid temperature: -15 ℃ to +120 ℃; gas to liquid ratio of about 1: 9 (inspiratory capacity of 8-10%); Self-priming height of 9-NPSH (m); horizontal to the suction port, vertical to the discharge port. Third, the scope of application of gas-liquid mixing flotation processing equipment, ozone water to take equipment, oxygen-rich water equipment, biochemical treatment equipment. A variety of temperature control device of the heat medium, refrigerant circulating transfer, a variety of filtering devices, from the underground tank to attract or high-pressure transfer of gasoline, diluent, a variety of solvents and other low viscosity liquid. Water, water, food, chemical liquid, waste and other spray treatment. Intermittent operation, water hammer, back pressure, such as dramatic changes in the harsh uses. Such as: small steam boilers, high-rise water supply, high-pressure tank high pressure water, vacuum tank to attract. Water samples are taken from rivers or water storage tanks, etc., and transferred to foaming liquids. Further Reading: pump valve pipe fittings Exhibition Water Expo Xiamen exhibition of marine equipment Internet + Forum Yiwu Fair 2016 exhibition mold top ten brands of the Internet information industry (Xiamen) Technology Co., Ltd. Author: Asian pumps Network Editor: Yao Xiaoxia (QQ / WeChat: 2355962924) http://beng.liuti.cn/ (Service Hotline: 400-6030-811)