FRP submerged pump is not afraid of flooding, but also has the advantages of rapid removal and installation of good mobility, able to cope with the surge in water level, pumping station flooded and other emergencies, the advent of large FRP submerged pump , So that the pump station structure type, installation, operating environment has undergone a revolutionary change. Xiaobian here to introduce the advantages of glass fiber reinforced plastic under what? What are the advantages of FRP submerged pump 1, the pump station is not afraid of flooding For low-lying flood prone areas, dykes in the burst or exceed the design standards of heavy rainfall, irrigation and drainage pumping station often flooded. Once the pumping station mechanical and electrical equipment soaked in water, cleaning and baking and other repair work is very large, will delay the drainage time and increase disaster losses. Therefore, the conventional flood control and pumping station itself is also one of the most important issues. However, FRP submerged pump is used submersible motor, pump unit can run underwater. Therefore, even if the pump station is flooded, the pump can work in the stable zone as long as the motor is not overloaded and the FRP submerged pump can be put into operation at any time. 2, the unit disassembly and easy In the past FRP liquid pump and the outlet pipe is bolted, mainly for deep well water, small construction drainage. However, the modern FRP submerged pump and the outlet pipe have been achieved between the automatic coupling, in the case of a fixed outlet, do not need bolts can quickly install and remove the pump unit, thus greatly speeding up the unit installation and maintenance speed. Such as Hebei Cangzhou Ye three pumping stations, each conventional diameter 1.4m vertical axial flow pump installation time of 15 to 20 days, while the same caliber FRP pump only one day. For small fiberglass submerged pump units, the installation and removal more convenient, and some just 1 hour can be installed or removed. This is for flood control drainage and other emergency disassembly pumping station is very favorable. The current large-diameter FRP submerged pump main installation type shaft and rail type two. Axial and guide vane Francis FRP submerged pump is the main installation of wellbore. Wellhead and suspended, curved pipe, floor, open and so on. In addition, for different types of inflow channels. Wellbore FRP submerged pumps can also be used. For the bell-type water runner shaft FRP submerged pump device form. 3, Pump Station Project Investment Pump station project investment includes civil investment and equipment investment. After using FRP submerged pump, civil investment and equipment investment can be reduced. Further reading: IFAT China Guangzhou exhibition industry leaders building water pump manufacturers ranking article belongs to Internet industry (Xiamen) Co., Ltd. All are welcome to reprint, please indicate the source and author of: Asian pumps Network Editor: lindj (QQ / WeChat: 181817456) Starting: http://beng.liuti.cn/ (Service Hotline: 400-6030-811)