Because the wooden door can only see the surface can not determine the internal quality, so the consumer is at a loss to understand the quality, in the face of the salesman's introduction, only sigh "untouchable doorway." In this regard, the relevant consumer associations summed up the five major mistakes in the purchase of wooden doors, allowing consumers to quickly and better buy wooden doors suitable for their own.
Uniform solid wood furniture   Ketu Sofa
Solid wood composite door structure is more stable
Myth: Many consumers believe that the use of natural wood in all solid wood doors is certainly more environmentally friendly and the quality is relatively better.
Pointing doorway: Environmental protection is mainly due to the glue used in the wooden door. After processing, the finished solid wood composite door is environmentally friendly as long as it complies with national standards.
Compared with all solid wood doors, the internal structure of solid wood composite doors is more stable, solving the problems caused by the seasonal changes of wood core boards, the differences in the average moisture content in different regions, the inherent shrinkage and swelling of wood, and other various differences. It is characterized by small deformation, corrosion resistance, easy cracking, heat insulation, etc. It also has good acoustic performance and can effectively play the role of sound insulation.
Solid wood doors are not necessarily "all solid wood"
Myth: Many consumers believe that only “all solid wood†is good, so when they go to a wooden store to buy products, they will ask “is it all solid wood?†When they hear a negative answer, they think that it is not good.
Pointing doorway: All solid wood doors are solid wood from the inside to the outside, or the core material is made of multi-layer boards. Its structure is mainly the connection of the door frame, the door core panel, and it belongs to the middle and high grade products in the market.
Because all solid wood doors are not stable under the weather conditions in the north, they are more likely to cause door body deformation, fissures at the joints, and surface cracking than other types of doors. Therefore, the solid wood doors in the Beijing market are mainly made of solid wood. , put veneer "wood composite door."
Due to price reasons, solid wood doors are usually made of solid wood only in areas where less materials are used such as wood strips, edge seals, and the like.
The whole wooden door price includes three parts
Myth: Many consumers saw the label price, thinking that it was the price of the entire door. In fact, some wooden doors may be more than double the price.
Pointing doorway: Although the prices of common wooden doors in the market mostly use quotes for the number of units, but the price of some high-grade wooden doors includes three parts: door leaf price, door frame price and wood price. The door leaf is the main body of the door and is priced in square meters. The door frame contains two front and back sides and is calculated in terms of perimeter. The wood line is a part of the door frame that surrounds the wall and is priced in meters. In addition, the prices of solid wood doors and solid wood composite doors do not include hardware locks. Usually special composite solid wood door contains three parts of the price, consumers simply add the price of the lock on the original price.
Low-grade paint door has no special place
Myth: Due to the exaggeration of some sales personnel, the surface finish of the paint door was declared to be good, easy to scrub, and the moisture-proof and fire-proof performances were all better than ordinary wood doors. Therefore, the paint door was considered to represent high quality.
Pointing doorway: high-grade paint doors use piano paint and metal (car) paint, the process is complex, long processing cycle, the price is high.
Some of the paint doors mentioned by the sales staff on the market actually use only infrared light and other methods to bake the doors. At present, some wooden door products use this technology, and there is nothing special about it, especially self-proclaimed high-grade environmental protection. PU (polyester) paint.
The low-grade paint door with a very low price, under the pollution of oil fumes, may not be long enough to change color, and the luster will gradually disappear.
Door lock hole can not judge the quality of core material
Myth: Some consumers who have experienced renovations have observed that the wooden door locks are installed on site. Therefore, when purchasing wooden doors, it is considered that the core material of the purchased wooden door can be observed through the door lock hole.
Pointing doorway: In the current manufacturing process of wooden doors in the market, in order to make the lock more solid after installation, will strengthen the strength of the door lock hole area, most of them are used lining Glulam approach, so through the door lock hole to inspect the site Wooden door core material does not truly reflect the quality of the wooden door product core material.
The door to buy building materials knowledge wooden door brand wooden door price paint furniture flat meter decoration
1. According to request it can do a single-stage and continuous cutting.
2. Operation of this machine is simple, reduced operational requirements of workers.
3. Machine with high degree automation, can achieve a continuous, intermittent feeding, effectively improve work efficiency;
4. Simple operation, flexible adjustment and stable operation.
5. Multi -purpose machine, can complete continuous feed and cutting length.
Angle Iron Root Cleaning Machine,Angle Bar Root Cleaning Machine,Angle Steel Machine,Heel Milling Machine for Angle Tower
Shandong EN FIN CNC Machinery Co., Ltd , https://www.shuofangcn.com