Recently, the New Technology Research Institute of Anhui Forklift Group, one of the top ten forklift trucks in the world, successfully developed a 4.5t hydraulic belt pump transmission box, which fully borrows and absorbs the company's large-tonnage forklift hydraulic transmission and the original 4.5t hydraulic power. The proven technology and structure of the gearbox not only reduces the development cost and manufacturing cost of new products, but also fully utilizes the components developed in the first two gearboxes to meet the needs of general forklifts. It is the perfect combination of the former two. , laid a good foundation for the upgrading of the company's products.
In addition, the company's engineering vehicle research institute shoulders the overall R&D and design work of the G-series forklift. The G-series forklift is a “new force†new-generation internal combustion forklift. It has a fashionable and dynamic shape, strong environmental protection configuration, and at the same time reflects the new design concept of “Jointâ€. The whole vehicle has a significant improvement from the appearance to the relevant technical configuration, the noise and emissions of the whole vehicle than the H2000 forklift. At present, the G series 3t forklift has completed the first round of trial production verification work, and is undergoing the second round of design modification and trial production.
It is also reported that the traction flatbed truck designed and developed for the first time by Baoji Shuangli Forklift Engineering Vehicle Factory, a subsidiary of the group, has been successful. They broke the conventional production organization mode and adopted a flexible approach. After 7 days of intense work, the two traction flatbeds designed and produced for a Lanzhou plant were successfully completed. The car is 3 meters long, 1.36 meters wide and has a rated load capacity of 2 tons, which fully meets the needs of users and has been praised by users.
Industrial sectional doors are the most durable and longest lasting doors to ensure circulation at the areas of the factory entrance and exit of goods, loading and unloading areas.
The body of sectional door is forming by 40 mm sandwich panels. These panels provides sound and heat insulation due to the intense doped polyurethane insulation was injected between galvanized steel sheet. (50 kg/m3).
Industrial sectional door systems provide space-saving with opening parallel to the ceiling.Any opening can be used clearly . and produces in accordance with the transition range and the height in the factory buildings or warehouses.
Doors is working sliding by be the most appropriate the gap between the top level of the gate with a ceiling height within the side rasils. The door can be mounted in different ways according to the gap distance (standard, low, highlift and vertical track systems).
Industrial sectional doors can easily be opened automaticly by 230-380 V-AC/50 Hz electric motor or manualy thanks to torsion spring system that balances the weight of the door.The galvanized springs are made to be durable of 25.000 door cycles.Motor with emergency chain All the drive systems have a mechanical back-up system fitted to the reduction gearbox of the electric motor, so that the sectional door can be opened if the power fails. The reduction gearbox can then be powered using the chain.
Industrial Sectional Door,Industrial Overhead Sectional Door,Industrial Warehouse Sectional Door,Industrial Garage Interior Sectional Door
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.highspeedshutterdoor.com