The principle of the air booster pump is to use the low pressure of a large area piston to produce a high hydraulic pressure of a small area piston. Air booster pump used in the original air pressure system to increase the pressure of the work environment, the working system can increase the air pressure 2-5 times, only need to work within the system as a compressed air source. Air booster pump working medium for hydraulic oil. Water and most of the chemical corrosive liquids, and high reliability, maintenance-free long life. Wide range of outputs: Smooth operation is required for all models with only a small air pressure, at this time a smaller flow rate is obtained, different flow rates are achieved after adjusting the intake air volume. Automatic packing: No matter what kind of pressure packing circuit caused pressure drop, it will automatically start to supplement the leakage pressure, to maintain a constant loop pressure. Safe operation: Gas driven, no arc and spark, can be used in dangerous places. The booster pump is a kind of plunger pump. The booster pump works quickly and reciprocally when it works. As the output pressure increases, the pump reciprocates and slows down until it stops. At this time, the pressure of the pump is constant and the energy consumption is the lowest, and the parts stop moving. Air booster pump pressure range, adjust the control valve to adjust the intake pressure, the corresponding output corresponding to the electrodeless adjustment.