Wireless high and low voltage voice nuclear phase meter is also known as "nuclear phase meter, nuclear phaser, wireless high-voltage nuclear phase meter, wireless high-voltage nuclear phase analyzer, high-voltage digital display audio phase detector, wireless high-pressure intelligent nuclear phase instrument" and so on. KT6900 wireless high-voltage and low-voltage nuclear phase meter is a full-intelligent wireless high-low voltage speech nuclear phase meter, which can be phased in very low voltage circuits. KT6900 wireless high-low voltage speech nuclear phase detector consists of detectors, receivers (hosts), telescopic insulation rods , monitoring software, USB communication lines and other components, its wireless transmission test data can penetrate barriers, a straight line transmission distance of about 80 meters. Fully automatic nuclear phase from 10V to 550kV (eg, 400V, 10kV, 35kV, 66kV, 110kV, 220kV), eliminating the need to purchase multiple sets of nuclear phase meters or separately configuring high and low voltage detectors based on voltage levels, saving costs, reducing carryover, and saving Fast and easy.
Wireless high and low voltage voice nuclear phase meter method of use:
1. Self-test to determine whether the phase instrument is good. [1] Insert the test lead into the meter socket first, and insert the 220V power supply into the other end. At this point, there are three reactions as described in Table 4; if there are three reactions, it is good. If there are no three reactions, there is a problem and it cannot be used.
2. Use a multimeter to check if the high voltage connection is conducting.
3. Testing header matters: The above methods for detecting nuclear phase meters are normal, and they can be formally nuclear. If it is known that the nuclear phase meter is normal, it can be used without detection. If there is no voltage indication during the test, the battery voltage is insufficient and the battery should be replaced. The instrument case can be opened and replaced with a new 9V laminated battery. Note: When the battery voltage is lower than 6V, there is no sound prompt, as long as the voltage is not lower than 4.5V, it can be displayed correctly.
4. Connect the high-voltage connection as shown in the figure below: Digital audio-visual high-voltage connection diagram Digital audio-phase high-voltage connection Figure 5. Predictive nuclear phaser: Before the formal nuclear phase, it can be in the same power grid system. The nuclear phaser test is good. One person touches one of the sticks and one of the electrical conductors, and the other contacts the sticks one by one in the same grid electrical conductor. There are three reactions in the different phases described in Table 4 and no three reactions in the same phase. Then you can officially nuclear phase.
6. Formal operation: The nuclear phase operation should be carried out by three persons, two people operating, one person monitoring. It is necessary to operate one by one, record one by one, and determine whether or not the phase is based on the “three, three, and none†described in Table 4. The nuclear phase operation should seriously implement the rules and regulations formulated by the unit.
7. Keep safe: During operation, the human body must not touch the nuclear phase meter, high voltage connection and grounding wire, and it is necessary to maintain the safety distance.
KT6900 wireless high-voltage nuclear phase meter main functions 1, the device has high and low voltage wireless voice nuclear phase, inspection, phase, frequency, phase sequence testing and other functions.
2, 10V ~ 550kV voltage automatic shift. All-intelligent, wireless transmission, speech nuclear phase.
3ã€10V low voltage precise nuclear phase, wireless transmission distance 80m.
4, -20 ° ~ 20 ° in phase; 100 ° ~ 140 °, 220 ° ~ 260 ° out of phase.
5, self-calibration error ≤ ± 3 °; on-site error ≤ ± 7 °, out-of-phase error ≤ ± 12 °.
6, the phase resolution of 1 °.
7. The insulating rod is in a contracted state of 600mm; the extensible state is 3200mm; and the pressure resistance is ≤110kV.
8, using 4.3 inch 65K color screen display, with "in phase, out of phase" and other voice functions.
9, can store 200 sets of data, with a USB interface, software monitoring, data can be uploaded to the computer.
Wireless high and low voltage voice nuclear phase meter method of use:
1. Self-test to determine whether the phase instrument is good. [1] Insert the test lead into the meter socket first, and insert the 220V power supply into the other end. At this point, there are three reactions as described in Table 4; if there are three reactions, it is good. If there are no three reactions, there is a problem and it cannot be used.
2. Use a multimeter to check if the high voltage connection is conducting.
3. Testing header matters: The above methods for detecting nuclear phase meters are normal, and they can be formally nuclear. If it is known that the nuclear phase meter is normal, it can be used without detection. If there is no voltage indication during the test, the battery voltage is insufficient and the battery should be replaced. The instrument case can be opened and replaced with a new 9V laminated battery. Note: When the battery voltage is lower than 6V, there is no sound prompt, as long as the voltage is not lower than 4.5V, it can be displayed correctly.
4. Connect the high-voltage connection as shown in the figure below: Digital audio-visual high-voltage connection diagram Digital audio-phase high-voltage connection Figure 5. Predictive nuclear phaser: Before the formal nuclear phase, it can be in the same power grid system. The nuclear phaser test is good. One person touches one of the sticks and one of the electrical conductors, and the other contacts the sticks one by one in the same grid electrical conductor. There are three reactions in the different phases described in Table 4 and no three reactions in the same phase. Then you can officially nuclear phase.
6. Formal operation: The nuclear phase operation should be carried out by three persons, two people operating, one person monitoring. It is necessary to operate one by one, record one by one, and determine whether or not the phase is based on the “three, three, and none†described in Table 4. The nuclear phase operation should seriously implement the rules and regulations formulated by the unit.
7. Keep safe: During operation, the human body must not touch the nuclear phase meter, high voltage connection and grounding wire, and it is necessary to maintain the safety distance.
KT6900 wireless high-voltage nuclear phase meter main functions 1, the device has high and low voltage wireless voice nuclear phase, inspection, phase, frequency, phase sequence testing and other functions.
2, 10V ~ 550kV voltage automatic shift. All-intelligent, wireless transmission, speech nuclear phase.
3ã€10V low voltage precise nuclear phase, wireless transmission distance 80m.
4, -20 ° ~ 20 ° in phase; 100 ° ~ 140 °, 220 ° ~ 260 ° out of phase.
5, self-calibration error ≤ ± 3 °; on-site error ≤ ± 7 °, out-of-phase error ≤ ± 12 °.
6, the phase resolution of 1 °.
7. The insulating rod is in a contracted state of 600mm; the extensible state is 3200mm; and the pressure resistance is ≤110kV.
8, using 4.3 inch 65K color screen display, with "in phase, out of phase" and other voice functions.
9, can store 200 sets of data, with a USB interface, software monitoring, data can be uploaded to the computer.
The undermount sink is installed under the countertop, which has more space for use. The countertop is easy to clean and maintain. You can easily sweep the dirty water from the countertop into the sink with a rag, making it easier to clean the kitchen.Undermount sink Follow this video, you can easily install an undermount sink in just a few minutes. A must-have in the kitchen, a high-quality and easy-to-clean stainless steel sink can help you perform household chores efficiently.
Undermount Sink,Undermount Kitchen Sink,Undermount Stainless Steel Kitchen Sink,Copper Undermount Sink
JIANGMEN MEIAO KITCHEN AND BATH CO.,LTD , https://www.meiaogroup.com