Put the billet manually, and check the working procedure: Before the equipment is used, check whether the connection is firm, and whether the installation bolts and nuts are tightened. Lubricate the engine oil in the right and left cases before starting the machine to test the electricity. The empty car should be carefully observed. Whether there is vibration, noise, whether the oil window comes to oil, whether the movement of each component is coordinated, and after everything is normal, the mold can be installed. When the mold is installed, the power must be cut off, and the motor belt or large gear is manually moved to make the work table transpose. And make the slide rise to the highest point, it is best to use an object supported between the table and the bottom of the slide, to prevent the natural fall of the anti-skid seat, causing accidents. Automatic feeding, billeting work procedure: mold installation and host test with the above, and then turn on the air compressor, vacuum pump, extruder, cut tile machine, discharge machine, tile press machine, host and wagon conveyor, parking , Stop the extruder first, then stop the rest of the equipment. The mold used in this machine needs an upper mold and six lower molds of the same size. The upper mold and the lower mold are installed first. The lower mold is directly mounted on the hexagonal wheel workbench. The upper mold is installed on the bottom surface of the slide, and Placing an appropriate thickness of the backing plate to ensure that the upper and lower molds are closed, the gap around the periphery is even, and the distance between the upper and lower molds is equal to the thickness of the required blank. Then the above model shall prevail. The workbench is indexed, and the rest of the five lower molds are installed. After all the upper and lower molds are installed, the car can be pressed.
Ningbo Jingcheng Technology Co., Ltd. is a professional NB-IoT Water Meters manufacturer.
Jingcheng wireless remote transmission water meter and the AMR (automatic meter reading) system were designed for the Water Supply Department, Which is new accounting management system. The system consists of 4 components: water meter, zone collector, GPRS concentrator and master point (management center). It adopts Zig-Bee with GPRS communication way to achieve a automatic and intelligent charge management.
Please feel free to contact us if you need any NB-IoT Water Meters.
Smart Water Meters,Nb Iot Water Meters,Wireless Amr Water Meter,Remote Wireless Water Meter
Ningbo Jingcheng Technology Co., Ltd. , https://www.jingchengmeter.com