The following is a description of the air-blowing and adsorption automatic locking screw machine:
1. Blowing type automatic locking screw machine
1. Blowing type automatic locking screw machine It is made up of automatic screw feeding machine system (ie screw feeder) and automatic manipulator. It is the screw that is blown under the batch mouth by compressed air, and automatically locked under the electric batch. On the product. The screw path is controlled by the robot, the pneumatic screw system works together, and the screw non-slip teeth, the leak lock or the screw are not in place. The whole set of equipment is fully automatic, and the maximum advantage of this mode automatic lock screw machine It is flexible and stable, and has high efficiency. According to the set coordinates, the machine automatically completes the product lock payment. Multiple electric batches can be installed, and multiple screws can be locked at one time, which is extremely efficient.2, the blowing type is generally suitable for screws below M5, the length is less than 25, and the total length L of the screw is greater than the diameter of the screw head D of 1.3, otherwise there will be a rollover phenomenon in the feeding tube, which can not be sent normally.
Second, the adsorption type automatic locking screw machine
1. Compared with the air blowing type, its structure is relatively simple, and the manufacturing cycle is relatively short. Its main features: If the screw is too small or too short, the blown-type (pipelined) machine can't realize automatic nail feeding. This machine is needed. The robot drives the electric batch to pick up the screw and move the lock (one by one. Lock screw). The screw is mainly the adsorption force generated by the compressed air of the electric batch head. The single screw is taken away and then positioned to the product hole position, and the electric batch is automatically locked into the product.2. Adsorption type is generally suitable for screws with relatively small length, light weight and insufflation, and the upper surface of the screw head and the vacuum suction head cavity of the electric batch form a certain airtightness. It is suitable for most screws, especially those that do not meet the length to diameter ratio requirements.
Compared with the suction type and the suction type, the blow-type lock screw machine directly conveys the screw to the batch mouth, eliminating the time for taking the screw back and forth, and the efficiency is higher and more stable. In today's era of rapid product upgrades, it can greatly save investment in fixed assets.
Plastic Grilles,Plastic Return Air Grille,Plastic Air Vent Grilles,Plastic Ventilation Grilles
Guangzhou Jointair Co., Ltd. , https://www.jointairaccessories.com