Master the principle of "small blocks of bricks and large blocks of bricks". Combined with the design effect, reasonable selection of small specifications. There are a wide variety of ceramic tiles on the market and the prices are far from one another. Often choose a piece of ceramic tile with a high price of more than ten yuan. When the whole house is counted down, the total price of tiles will be a few thousand or several ten thousand yuan. This is because the relationship between the amount of tiles is not taken into consideration. In fact, the method of saving the amount of ceramic tile is very simple. Generally speaking, the wall tiles are generally small and no more than 200 or so. Generally, the living room does not exceed 600 or so. In home decoration, if you want to save the tiles and reduce the cost, it is recommended to consider from the following points:
1, find a designer, select the appropriate specifications, draw a row of bricks. Calculate the number of tiles according to the figure, plus the normal construction loss.
2. Select varieties that do not require high levels of “fight for colors†and “fight patterns†so that the cut half (or edge) can be used elsewhere.
3, adjust the plane, facade design, to avoid the riser tube, a small corner that must be cut, easy to damage the waste of tiles.
4. Clever use of waist line, other specifications tile mosaic color, floor circle line, vertical decoration line, bathroom wall mirror size and other aspects of the design, rich effect at the same time, to avoid or reduce the cut tile.
5, master the home improvement "small blocks of brick, large blocks of fees" principle. Combined with the design effect, reasonable selection of small specifications. Wall tiles generally small bathroom, not more than about 200 as well, the general living room, not more than about 600 as well.
6. Select high-quality ceramic tiles and high-tech workers to reduce unnecessary wear and tear during construction and cutting. Although the unit price is slightly higher, it still saves in the overall calculation.
Summary: Generally speaking, the floor tile is more common, and the ceiling of the house is filled with ceilings or ceilings, so basically no tiles are used. Tiles or wooden floors can be chosen in the living room, dining room and bedroom floor, but tiles must be used for balconies, bathrooms and kitchen floors. If the ground is an ordinary rectangle or square, simply multiply the measured length and width. If it is an irregular shape, you need to first calculate the overall area, then calculate the excess area and reduce the compensation.
Money Decoration Tile Shop Decoration Experience Home Improvement Decoration Decoration Living Room Bathroom Design Bathroom Wall Tiles Bathroom Tiles Small Bathroom Design Toilet Size Tile Size ld Tile
Material: Brass H59
Handle: Single Handle
Spool: Ceramics
Flow Rate: ≥12L/min
Water pressure testing: 1.6 Mpa
Air pressure testing: 0.6 Mpa
The thickness of chrome plating: Nickel>8um Chrome>0.2um
Brass Single Handle Basin Faucet,Single Lever Basin Faucet,Single Hole Basin Faucet
Heshan Jasupi Sanitary Ware , http://www.jasupifaucets.com