Wall acceptance is one of the most important items for home improvement acceptance. Be sure to be careful when checking. Otherwise, you will find the problem after you move in. This can be very troublesome. The following will introduce the acceptance points of wall paint, wall tiles and wallpapers for netizens in detail.
First, the detailed formation of the paint wall paint acceptance guide
Whether the effect of wall painting is smooth, does not fall off, and mold does not depend on the quality of the coating and the construction technology, especially the treatment technology of the wall base layer. Therefore, the acceptance of the wall paint must begin with the grass-roots level, and when it is not painted yet, it should be checked and accepted again.
Acceptance of the wall base: The primary treatment is the key link to guarantee the construction quality. Among them, it is the most basic condition to ensure that the wall is completely dry, because the cement used for the cement material is strongly alkaline before it is hardened. At this time, the latex is applied. The paint must be anti-alkali. When the cement mortar hardens, the basic value drops sharply, and the latex paint can be applied at this time. The drying time varies depending on weather conditions and should generally be kept for more than 10 days. The wall surface must be flat and at least scraped twice. If it still fails to meet the standards, it should be scraped to meet the standard requirements.
Acceptance of wall paint: The types and colors of materials used in latex paints are in line with the design requirements, and the color of the paint surface is the same. No ground defects, no brushing, no powder, no alkali, no peeling, no bite, etc. are allowed. . When spray guns are used to spray, the spray points are even and dense, and no skinning phenomenon is allowed. Flowing falls are not allowed. The hand touches the paint film and does not drop powder. The doors, windows, lamps and furniture are clean and free of paint marks.
Acceptance points and standards:
1, should stand 1.5m away from the wall to observe, no trachoma, bite color, flow fall, color, bottom and so on.
2, should be painted uniform, strong bond, not leaking, through the bottom, from the skin and anti-rust.
Paint construction notice: Large area is the use of roller coating, the use of hand brush corners, so as not only to improve the brushing efficiency, but also to ensure the brushing quality. When the latex paint is applied, it must be fully stirred before it can be used. When it is used for color matching, it is necessary to choose an alkali-resistant, light-resistant color paste to be mixed into the paint, and it is forbidden to mix dry paint into the paint. After the emulsion paint with color paste is mixed, it must be stirred for at least 5 minutes, so that the color can be used after the construction.
Second, smooth and neat brick wall tile acceptance points
The kitchen decoration of the kitchen and bathroom is mainly based on tile paving, and the wall tiles should be flat, solid, and tidy. There are several steps and standards for the acceptance of the construction of a wall tile.
Wall tile acceptance steps:
Wall tile common problems and exceptions:
1, empty drum off: The main reason is that the adhesive material is not full, the bricks are not soaked enough and the base layer is not processed. During construction, the bricks on the sleeve must be clean and free from immersion for not less than 2 hours. The thickness of the adhesive should be controlled between 7 and 10 mm and should not be too thick or too thin. When sticking, it is necessary to make the tile and the bottom layer stick densely. You can tap it with a wooden hammer. When hollow drums are produced, the wall tiles shall be removed, the original bonded mortar shall be removed, and cement mortar shall be used to repair the total volume of 37 glue.
2, color change: the main reason in addition to poor tile quality, axial surface is too thin, the operation method is also an important factor. The materials should be strictly selected during construction, and clean water should be used for soaking the sleeve bricks. Paste cement mortar should use pure sand and cement. Always clean the remaining mortar on the brick surface during operation. If the color change larger wall tiles should be updated.
3, seams are not straight: The main reason is that there are differences in the specifications of bricks and improper construction. The bricks should be carefully selected during construction and the same kind of dimensions should be used together for one wall. The standard points must be posted. The standard points must be on the basis of the ruler. After each line is pasted, it should be checked in a timely manner by using the ruler horizontally and vertically. If the joints exceed the allowable error, the wall tiles should be removed in time for rework.
Third, smooth paper paper wallpaper patch acceptance points
Paving wallpaper is a wall decoration method that many consumers like, because it has the advantages of convenient construction, easy replacement, and more choice of colors. The most important thing for wallpapering the wall is to make it smooth, comfortable, and seamless.
Wallpaper acceptance criteria:
1. The surface of the wallpaper and wall cloth after the application of paste should be smooth, and the color should be uniform. There should be no ripples, bubbles, cracks, wrinkles, and spot stains. There should be no glue mark when squinting;
2, wallpaper, wall coverings and all kinds of decorative lines, equipment boxes should be handed over closely;
3, wallpaper, wall cloth edges should be straight and tidy, no paper hair, fly;
4, wallpaper, wall cloth at the corner of the lap should be shun light, the sun corner should be no seams;
Wallpaper acceptance method: After the wallpaper is finished, there is no obvious seam or inconspicuous on the paper standing 1.5 meters away; the flowers are neat; the sticks are firm, no slits, empty drums, alice, folds, stains, Burrs, glue marks, and indentations; no seams at the yin and yang corners.
In addition, there is a need to pay attention to the fact that some wallpapers can't be seen because of the pattern or color, and they can see seams against strong light. The light-colored or thick-textured style basically does not have the above problems from the visual effect.
Note for paving the wallpaper: When starting the wallpaper, for the seams, both sides of the adjacent two wallpapers are squashed to make them fit. Then the seams are pressed with a scraper and the extruded glue is cleaned. After the wallpaper is pasted, use the scraper to paste the wallpaper from top to bottom. 2, easy to produce in the wallpaper pavement problems 1) wallpaper pavement prone to open plastic, patchwork, seams, yellowing and other issues.
Wallpaper maintenance tips:
1. To deal with the mildew of the wallpaper, wipe the wall with a dry cloth first, add 4 cups of disinfectant half cap to 4 cups of water, or use a diluted professional wallpaper cleaner, and mix evenly to wipe off the mold. Wall surface.
2. If it is caused by the dampness of the wallpaper, you can use professional wallpaper glue to paste it, and use flat objects, such as books, such as table tennis bat pressure can be. If it is a phenomenon of blistering, use a sewing needle to make a small hole in the foaming position on the surface of the wallpaper, release the gas, take the appropriate amount of adhesive and put it into the eye of the needle to stick it tightly, and then flatten it with a flat book to dry it.
3. If the edge of the wallpaper is cracked due to chapped cracks, if not, use a syringe to inject glue into the edges of the wallpaper cracks and try to re-seal the wallpaper. Or use wallpaper glue powder, wipe it at the curling edge, smooth out the curling place, blow it with a hair dryer for about 10 seconds, and then press it with hands until it is firm, and blow it to dry with a hair dryer. When repairing, it is necessary to first determine whether there is a problem at the grassroots level. It is necessary to extend the repair and extend the repaired area to the vicinity with the cracking area as the center.
Construction Acceptance Paint Buy Three Tree Paint Wallpaper Paint Lacquer Cement Paint Kitchen Tile Bathroom Tile Toilet Door Bathroom Tile Color Bathroom Wall Tile Toilet Size Toilet Design Toilet Door Size Tile Plastic Kitchen Tile Tile Specification
What is LVT Flooring?
LVT flooring,( 1911980,luxury vinyl tile), is the ideal combination of everything a flooring product should be – elegantly designed, highly durable, and easy to maintain. With LVT, you can authentically mirror the look of natural materials, but with a product that is built to withstand commercial environments. LVT means not having to sacrifice high-quality design for industrial utility.
LVT flooring,( 1911981,luxury vinyl tile), is the ideal combination of everything a flooring product should be – elegantly designed, highly durable, and easy to maintain. With LVT, you can authentically mirror the look of natural materials, but with a product that is built to withstand commercial environments. LVT means not having to sacrifice high-quality design for industrial utility.
LUXURY VINYL PLANK,GLUE DOWN
Omega Eco Deco Materials(GuangDong) Co., Ltd , https://www.rococfloor.com