1. Process Analysis Our company has a crankshaft-like main key body punching parts as shown in Figure 1. The quenching hardness is 55-60HRC, and the precision is relatively high. It is more difficult than other parts, which causes certain difficulties for machining. After careful analysis of the shape and technical requirements of the parts, we have designed the following process, the process analysis is as follows:
Honde solar ground mounted system adopts full hot-galvanized steel structure and Ground Screw for panel installation. It is quite cost effective, and this screw-in foundation system is not only suitable for natural ground, but also for dense and even tarred surfaces.
Mounting type: carbon steel solar ground screw mounting system
Ground clearance: customized
Tilt angle: customized
Max wind speed: up to 60m/s
Snow load: 1.4KN/m2
Panel direction: portrait or landscape
Standard: International Standard & AS/NZS1170 & CE
Warranty: 5 years on material
Screw Pole Mounting System,Pole Ground Mounting System,Solar Panel Stand System
Hebei Honde Plastic & Metal Co., Ltd. , https://www.foundation-system.com