The bathroom decoration is cumbersome, and various matters are difficult to unify a standard. Today, Xiaobian sends the gospel to everyone, the bathroom decoration details, you must know the nine details, master the details, let you instantly change the sound of bathroom decoration experts!
1. Ceiling: Because the water in the bathroom is heavier, it is necessary to choose materials that are waterproof, anti-corrosive and anti-rust.
2, the ground: before laying the floor tiles, be sure to do waterproof; after the tile is laid, ensure that the brick surface has a drainage slope (usually about 1% is appropriate), the slope is facing the floor drain; the ground must be done after laying the tile For closed water experiments, the time must be at least 24 hours; when laying the floor tiles, pay attention to the seams and alignment with the wall tiles to ensure the overall sense of the whole bathroom, so as to avoid a visually messy impression.
3, the wall: the tile on the wall should also be moisture-proof and waterproof, and the tile should be flat when it is tiled, and should be seamed and aligned with the floor tile to ensure the overall feeling of the wall and the ground; The cut of the tile should be small and appropriate, and the flange cover on the water heater can be easily covered to make the appearance perfect.
4, doors and windows: the bathroom is best to have windows for ventilation; if there is no window, pay special attention to the details of the door. In order to prevent the water from overflowing in the bathroom, the door boundary should be slightly higher than the inner side of the bathroom; the gap between the door and the floor of the bathroom should be kept larger to facilitate the return air; if it is a sliding door, the sliding door and the bathroom should be Make a layer of waterproof between the tiles.
5, circuit laying: the wire joints in the bathroom must be tinned, and must be wrapped with waterproof tape and insulating tape to ensure safety; wire body must be covered with flame retardant pipe; all switches and sockets must have moisture-proof box, and location It depends on the size and location of the appliance to ensure convenient and reasonable use.
6, waterway transformation: the bathroom water supply and drainage lines are best not to make too much changes, if you want to change, depending on the specific circumstances, such as the washing machine model, the location of the water will be different.
7. Sanitary installation: It is best to remember the distance of the sewer hole before the decoration. According to the size, choose the sanitary ware such as bathtub, bath room, toilet, wash basin, etc., so as not to be unsuitable in the decoration; the installation of the toilet should be used first. The mud is sealed and then fixed with expansion screws or glass glue, which is easy to repair when the toilet is blocked.
8. Ventilation and ventilation: There must be an exhaust fan in the bathroom, and the exhaust fan must have a retrograde gate to prevent the dirty air from flowing backwards.
9. Greening: Adding anger. The bathroom should not be a corner forgotten by the green. During the decoration, you can choose some shade-resistant and wet pots to be placed in the bathroom, which makes the place a little more angry.
There are two main Bonded NdFeB Magnet manufacturing methods:
ï‚·Bonded Injection Plastic Moulding NdFeB
ï‚·Bonded Compression Moulding Ndfeb
Injection Plastic Ndfeb Magnet , a kind of new-generation composite material made from permanent magnetic powder and plastic, has outstanding magnetic properties and plastic properties and features high size precision and exceptional shock resistance. It can be processed into various components with complicated shapes, thus can be used in the industries of micro or special motors, office equipment, intrument, meter, and beeper. Custom design will be available.
Production Chart of Bonded Injection Plastic Moulding NdFeB
Bonded Ndfeb Magnet has advantages and that's why customers choose:
1. Design and manufacturing of orientation moulds were carried out.
2. Having high dimensional precision and impact-resistance. Capable of forming products with inlay.
3. The Injection Plastic Moulding parts are suitable for forming products with various shaps and thin walls.
4. Muti-polar magnetization can be carried out according customers' requirements.
Application of Bonded Injection Moulding Ndfeb magnets:
•Different kinds of micro-special motor
•House electric apparatus
•Synchronization electric motor
•DC motors
•Instruments for Auto
•Time gauge
Bonded Injection Moulding NdFeB
Bonded Injection Moulding Ndfeb,Neodymium Bonded Electrical Magnet Ring,Ndfeb Plastic Injected Bonded Magnet
Jinyu Magnet (Ningbo) Co., Ltd. , https://www.magnetbonwin.com