Lshf Compound for Remote Optical Cable

Introduction
EPchem® RRU-0706 is polyolefin based material containing inorganic flame retardant, antioxidant, lubricant, etc., produced by mixing, plasticizing and then pelletizing. RRU-0706 is appropriate for sheath of remote cables and so on.
RRU-0706 is excellent in mechanical properties, outstanding resistance to UV and good processability.

Characteristics *The data in the list above is typical value rather than the guarantee value.

Processing
RRU-0706 has good processing performance, can be well processed using PVC and Polyethylene standard extrusion screw, preferring a low compression ratio (1.2 ~ 1.8) screw for the best extrusion effect. In general we recommend the following processing conditions:

• Extruder L/D: 20~25
• Filter (mesh): 30~60
• Temperature setting:

     Zone1    Zone2    Zone3   Zone4    Zone5      Die
    110ºC   120ºC   135ºC  145ºC   150ºC   150~165ºC
The above temperatures are for reference only, but should be adjusted depending on specific equipment.
RRU-0706 can be extruded by squeeze die but also squeeze tube die.

Storage
These compounds must be stored under the following conditions:

1. closed and undamaged bags
2. ambient temperature does not exceed 45ºC
3. avoid direct exposure to sunlight and weathering
4. shelf life:12 months.

Package
To be packed in aluminum foil bag inside and kraft paper bags outside, 25kg net each; or damp-proof cabinets on pallet, 1000kg net each.







The workshop:


Package :


  Introduction
EPchem® RRU-0706 is polyolefin based material containing inorganic flame retardant, antioxidant, lubricant, etc., produced by mixing, plasticizing and then pelletizing. RRU-0706 is appropriate for sheath of remote cables and so on.
RRU-0706 is excellent in mechanical properties, outstanding resistance to UV and good processability.

Characteristics *The data in the list above is typical value rather than the guarantee value.

Processing
RRU-0706 has good processing performance, can be well processed using PVC and Polyethylene standard extrusion screw, preferring a low compression ratio (1.2 ~ 1.8) screw for the best extrusion effect. In general we recommend the following processing conditions:

• Extruder L/D: 20~25
• Filter (mesh): 30~60
• Temperature setting:

     Zone1    Zone2    Zone3   Zone4    Zone5      Die
    110ºC   120ºC   135ºC  145ºC   150ºC   150~165ºC
The above temperatures are for reference only, but should be adjusted depending on specific equipment.
RRU-0706 can be extruded by squeeze die but also squeeze tube die.

Storage
These compounds must be stored under the following conditions:

1. closed and undamaged bags
2. ambient temperature does not exceed 45ºC
3. avoid direct exposure to sunlight and weathering
4. shelf life:12 months.

Package
To be packed in aluminum foil bag inside and kraft paper bags outside, 25kg net each; or damp-proof cabinets on pallet, 1000kg net each.







The workshop:


Package :


 

Wall Light

We supply various indoor wall light, including decorative wall lamp, wall bracket lights, wall lamps for bedroom etc.

All the indoor wall lights are with good light transmittance, warm, romantic and softer light.

If you want to know more about the products in Wall Light, please click the product details to view parameters, models, pictures, prices and other information about Wall Light, Indoor Wall Light, Wall Lanterns Indoor, Indoor Wall Light Fixture.

Whatever you are a group or individual, we will do our best to provide you with accurate and comprehensive message about Wall Light!

Wall Light ,Indoor Wall Light ,Wall Lanterns Indoor,Indoor Wall Light Fixture

NINGBO LONGFLIGHT INTELLIGENT TECHNOLOGY CO.,LTD , https://www.long-flight.com