Almost everyone has this experience, balcony, bathroom or kitchen tiles often appear loose or even off the phenomenon, the wall is very unsightly after falling, there are many reasons for the loss of tiles, how we targeted solution Tile falling off?
First, shedding reattachment
When the tiles are directly detached due to improper construction or aging problems, how to paste the tiles back, in addition to the necessary basic flow, there are different treatment situations depending on the mortar condition of the residual wall surface.
Second, the mortar is not loose
If the mortar is not loose, but the tiles fall off, you can scrape the mortar on the back and around the tiles, and then use 107 glue to mix in a little cement to paste, and evenly paint a thin layer on the back of the tile. After pressing the tile, it will stick.
Third, the mortar has peeled off
If the mortar drops together with the tiles, first lightly plucking some of the pits on the original foundation surface, and then re-embedding the mortar with 107 glue. After brushing one layer on the foundation surface, press the detached tiles up until the mortar. hardening. It should be noted that if the tiles are only partially peeled off, do not use force to beat the mortar on the foundation surface to prevent the tiles from vibrating around the original strong tiles.
Fourth, the junction of the facing off
The old tiles are still intact, but they are only separated from the junctions of other finishes. When repairing, the sand at the seams can be removed first and then the epoxy adhesive (wanner) is injected. After drying, the joints can be waterproof and flexible. The caulking material (such as glass glue) is embedded.
Tips: More practical decoration knowledge, real scene with the shoot, please pay attention to the palm of this site (micro signal: mall_jia).
Decoration construction knowledge
Tea strainer/infuser,High Quality Tea strainer/infuser,Tea strainer/infuser Details, CN
Yangjiang YJCB Trade Co., Ltd , https://www.cbprokitchen.com