The reason why stone is used for the decoration of high-end buildings is to make full use of its excellent physical properties, especially its rich colors, which are unmatched by other materials.
The reason why stone is used for the decoration of high-end buildings is to make full use of its excellent physical properties, especially its rich colors, which are unmatched by other materials. However, this gloss is also more likely to disappear slowly during use, so understanding the formation principle of stone color, stone conservation is an important means to maintain the natural color of stone. Today, I will introduce you how to clean and maintain different materials of bathroom stone:
The formation principle and solution of stone color difference
Since the color of the stone is naturally formed, the quality of the color is determined by the pigment ions contained in the stone and the internal structure. At the same time, the different order of the different minerals that make up the stone will also affect the color change, which is the color difference. Therefore, when using decorative stone, there is often a problem of color difference. According to the different stone structure and color characteristics, the decorative stone with chromatic aberration phenomenon is roughly classified into two categories, and different solutions are proposed accordingly:
1, the same color of stone
Stones of the same color type refer to a type of stone having the same structure and characteristics and having the same or similar color composition. For example, the large and medium-sized flowers, the middle flower and the small flower, the smooth surface and the rough surface of the white peony of Shandong, the new surface and the old surface, and the upper and lower ore layers all belong to the same color. For the color difference between these stones, it is recommended to use a color-increasing stone curing agent (also known as wet color agent, preservative) for processing. The color-increasing stone curing agent is suitable for the adjustment of the small color difference between the same color stone and the darkening of the dark-colored stone with respiratory micropores such as marble, granite, sandstone and slate which are worn, faded and dull. deal with. The color enhancement effect on light-colored stone is not obvious. Since it is not easy to fade after color enhancement, it is recommended to do a small sample experiment to confirm the effect and then do a large area construction.
2, different color stone
Stones of different colors refer to a type of stone that has completely different structures and characteristics, and whose color components are completely different or greatly different. For example: gold wire beige and new sago yellow, Spanish beige and white sand beige, Shandong white linen and American gray linen are all different colors of stone. For the color difference between them, it is recommended to use the coloring method (staining) for processing.
At present, there are about twenty ways to color stone at home and abroad, and most of them require specific equipment or sites. This is not very realistic for the stone conservation industry. The use of stone stains for coloring is a good and simple method. However, since the stone is not easily removed after being colored, it is recommended that the construction be carried out by a professional technician to avoid unnecessary loss.
Stone-enhanced curing agent gives the stone a natural luster
Due to different varieties and construction techniques, the aesthetics of finished products are also different. Some are bright and bright, while others are slightly less expensive. Some dyed stones will lose their original color after long-term use. The beautiful appearance will look dull. Most of the stone that has not been polished, such as slate, boulder, mushroom stone, etc., will have the above-mentioned defects, which will not only affect the effect of decoration, but also have no water-repellent surface, and it is easy to produce stone common disease.
The use of siloxane-based materials for glazing stone care products to deal with such conditions, the treated stone color is bright and bright, and at the same time has the effect of waterproofing, anti-fouling and can maintain long-term stable stone.
At the same time, the coloring treatment of stone is suitable for matte stone (such as cultural stone) fire board matte surface and rough surface stone, including the role of slate coloring treatment to enhance and maintain color and texture, can be bonded on indoor and outdoor stone, resulting in a The layer is transparent and the matt coating provides maximum protection. The fee standard is negotiable.
The brightening treatment of the stone is suitable for strengthening the brilliance of the stone, and is used to protect the countertop wall. After the surface treatment of the stone, the software cloth is polished to form a fixed protective layer and exhibit a natural luster.
Stone surface brightener greatly improves stone gloss
"Stone surface brightener" can directly apply the stone surface to the surface of the stone, spray treatment and mechanical polishing, sticking treatment, the construction process is very simple. "Stone surface brightener" has strong permeability and bonding strength, and can form a hard crystal layer on the stone surface, which greatly improves the surface gloss, abrasion resistance and antifouling performance of the stone surface. This treatment is applicable to various calcium carbonate-based marbles such as beige, black and white roots, and the like. Of course, if you want to carry out large-scale stone maintenance, you need to deal with it in various ways.
Precautions for the construction of stone surface brightener:
1. Please bring rubber gloves and masks during construction. The medicine splashed on the body and skin should be rinsed off with water as soon as possible.
2, must be constructed in a well-ventilated place, do not use the nose to deliberately smell the rising misty gas, otherwise it will hurt the body.
The use of the above curing agent on the stone can make the stone bright as new. However, in the daily life, we must pay attention to the maintenance of the stone, so that the stone can be used for a longer period of time. Wipe frequently, keep the surface clean and regularly carry out stone maintenance to keep the stone surface fresh and new. Try to avoid acid chemicals directly contacting the surface of the stone to avoid chemical reactions, resulting in color differences or affecting the quality of the stone. Try to avoid the shoe nails rubbing the ground directly and often, causing the stone surface to be rough and dull.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Basin Faucet,Face Basin Faucet,Basin Sink Faucet,Hot And Cold Basin Taps
AIHUI Sanitary Ware , https://www.fsaihuisanitary.com