Environmentally-friendly furniture refers to those furniture that are based on the ecological industry and that are reasonably developed and made of natural materials to meet the specific needs of users, are beneficial to users' health, and have a high cultural heritage and scientific content. So, how to choose environmentally-friendly furniture? In the description of environmentally-friendly products, we can generally see the paints or coatings of wood, plates, hardware (hinge, slide, handle, decoration, connector), from these aspects, It can judge the environmental performance of furniture.
Wood sheet: pay attention to formaldehyde emission
The main indicators for selecting wood are formaldehyde release and service life and strength. The amount of glue used for the production of plates from small to large is solid wood single board (no glue), solid wood horizontal board, solid wood finger joint board, multi-layer solid wood veneer composite board, plywood, blockboard, oriented strand board, particle board, medium density fiberboard , high density fiberboard. If it is assumed that an environmental grade of aldehyde rubber is used, the amount of formaldehyde released is also increased in turn.
The life index mainly depends on which kind of plate retains the original features of the wood. The structural fibers of the wood are oriented. Its long fiber linear molecular chains and conduits are naturally formed. If the structure is destroyed more, the life and strength are lower. For example, medium-density fiberboard is formed by crushing the wood to form broken fiber and then hot pressing. Some features are close to the performance of the paper, such as fear of moisture, poor strength, furniture. Short life. Experiments have shown that poor wood-based panels have less than one-fifth the life of ordinary wood.
Paint selection: high purity and fast evaporation
At present, most of the paints in the world are made of paints without chemical oil-based release agents. The paints used in China, such as lacquers, lacquers, polypropylenes, alkyds, polyurethanes and polyester lacquers, use oily olefins. The main effect of the olefin is to dilute the paint for easy brushing. After the paint is dried, it will volatilize. Generally, the paint olefin has high purity and fast evaporation. It is basically completely dry within half a year. If it is not good paint, the purity of the olefin is not good. It may not be volatile in one or two years. The worst paint may have a longer evaporation period. The chemical composition of the olefin is too much, the purification is not good, the performance is close to the asphalt, and it is very difficult to completely dry. Because the chemical spectrum in the olefin is too much, each has a different evaporation period, so the interior is often odorous. Practice has proved that it is certain that the air pollutants exceed the standard, and the tastelessness may not exceed the standard. In addition, in China's furniture standards, only the maximum limit of formaldehyde requirements, there is no requirement for the release of harmful gases in the paint, which needs to be improved.
Bathroom Shower room from Castel can be divided into sliding shower room,shower room door and shower room screen. 6mm/8mm tempered glass and high quality aluminum frame make sure the high quality and safety. It can be widely used in home bathroom or some projects.
- We choose the tempered glass with national 3C certification and European standard. These hiigh purity and good permeability tempered glass have 3-5 times bendign strength and 5-10 times impact strength comparde with normal glass,which ensure the safety in use.
- High quality aluminumprofiles which have good corrosion resistance and toughness features.
- Handles with chrome plating pass the 24 hours acetic acid salt spray test.
Shower Room,Bathroom Shower,Bathroom Shower Enclosure,Tempered Glass Shower Room
Foshan Castel IMP&EXP Co.,Ltd , https://www.fscastel.com