Nowadays, the quality of real estate developed by various developers in the property market is uneven, and in order to ensure the quality of the house, many people will employ professional home inspection companies to help them when they collect their houses. In fact, it is not necessary to hire a professional house inspection company. Everyone can inspect the house by themselves. So how do we check and accept new houses? The following Xiaobian will share with you on this issue and look forward to helping the friends of the owners in need.
How to Accept a New House
There are many aspects of new house inspection that need to be inspected. Among the numerous acceptance projects, the walls are the most intuitive, and everyone can accept the next wall. On the one hand, we must look at the wall for leaks. The owner can go to visit the next day before the house is delivered and after heavy rain. Secondly, look at the wall for cracks. If it is found, immediately look for an opener to respond and ask to be careful in order to avoid leaving troubles. .
How to Accept New Homes
Hydropower is related to human safety, so the acceptance of hydropower is also extremely important. We first check whether the hydropower is open. Then check the water pipe for leaks. Check whether the wires meet the national standards and whether the cross-sectional area of ​​the wires meets the requirements. Generally speaking, the wires in the home should not be lower than 2.5mm2. The line should reach 4 mm2, otherwise it will easily overheat and soften when using the air conditioner.
How to Accept the New House
At the time of collection, everyone can ask whether the real estate developer has done waterproofing. If the real estate developer does not do waterproofing, then the renovation will be done; if the house is already waterproof when it is delivered, we have to do it. Waterproof experiment: Use cement mortar as a door to block the kitchen and bathroom, take a plastic bag covering the drain or drain and put it together, then put water on the kitchen and bathroom floor, shallow on the line (water height about 2cm ). Make an appointment with the owners downstairs to see if there is any seepage in the ceilings of their home kitchens and bathrooms after 24 hours.
How to Accept the New House
In addition to the acceptance of the above several projects, there are still many projects that require acceptance. For example, we need to check whether the pipeline water is flowing smoothly. Check whether the sewage pipe has water storage and deodorant elbow; then we must also test the ground level. Generally speaking, if the difference is about 2cm, the 3cm is an acceptable range beyond this range. It is necessary to pay attention; the floor height is also in need of inspection. The feet are measured along the inside corners of two of the walls, and can also be measured in multiple places in the house. Generally speaking, about 2.65 m high is an acceptable range; Below 2.6m, people feel depressed; the final acceptance of the doors and windows is good.
Acceptance of new houses is a very professional job, but after learning, everyone can also become a master of home inspection. The above is Xiaobian on how to check the acceptance of new homes and share the acceptance of new homes, give everyone a reference! If you have more related questions, welcome to continue to pay attention to Qijia Information. We will provide more exciting content for you later.
Ptfe Gasket Pressure Rating,Ptfe Gasket Sheet Specification,Ptfe Gasket Temperature Range,Expanded Ptfe Gasket Tape
Cixi Congfeng Fluorine Plastic Co.,Ltd , https://www.cfptfeseal.com