Grouting pump 2ZBQ pneumatic injection pump ZBQ (2ZBQ) type injection pump

2ZBQ-type pneumatic injection pump can be blocked for a long time with no heat in the large water vapor safe use of occasions, the pump using the working medium (slurry, compressed air) transmission of pressure signals, composed of closed-loop automatic regulation performance, it is simple and safe Reliable, improve construction work rate. The pump has the function of automatically adjusting the pumping capacity of the pump according to the preset grouting pressure. Therefore, the automatic positioning performance of the pneumatic pressure does not have the phenomenon of "self-stop", and the discharge capacity and the pressure of the discharging can be adjusted steplessly. A pump can be used to note a single slurry and double slurry and chemical pulp. Coal Mine 2ZBQ pneumatic grouting pump features: 1, grouting pressure control accuracy, pressure and flow stepless adjustment. 2, Note single liquid slurry, double liquid cement (water glass) pulp, chemical pulp and so on. 3, slurry seal material imported wear-resistant materials, acid, temperature. 4, suction and exhaust valve seat using imported alloy material, life expectancy of more than 3 times the normal seat. 5, the valve for the cut-off valve, anti-pollution ability. 6, reliable performance, easy maintenance. 7, MT push-in inlet, into the pulp mouth, easy to operate. Main technical parameters: 2ZBQ50 / 4 coal mine pneumatic injection pump Supply pressure - 0.3 ~ 0.63 (up to 0.8) Mpa, double slurry ratio - 1: 1 (adjustable) Model 2ZBQ50 / 4 Rated flow L / min 50 Rated pressure MPa 4 Air consumption m3 / min 0.7 Weight kg 41 Dimensions m 0.88 * 0.48 * 0.7 Maximum rated flow L / min 60 Maximum rated pressure MPa 6 Model 2ZBQ24 / 10 Flow 24l / min Pressure 10mpa Main technical parameters: 2ZBQ40 / 11 coal mine pneumatic injection pump supply pressure - 0.3 ~ 0.63 (up to 0.8) Mpa, double slurry ratio - 1: 1 (adjustable) Model 2ZBQ 40/11 Rated flow L / min 40 Rated pressure MPa 11 Air consumption m3 / min 1.5 Weight kg 83 Dimensions m 1.3 * 0.6 * 0.7 Maximum flow L / min 50 Maximum pressure MPa 13

Alnico materials (composed predominantly of aluminum, nickel, and cobalt with minor amounts of other elements including titanium and copper) permit design latitudes providing high indications, high energies and relatively high coercivities. Alnico Magnets are characterized by excellent temperature stability and good resistance to demagnetization from vibration and shock. AlNiCo Magnets offer the best temperature characteristics of any standard production magnet material available. They can be used for continuous duty applications where temperature extremes up to 930F can be expected. AlNiCo Magnet, alnico magnets, alnico bar magnet, alnico horseshoe magnet

Alnico magnetsl are manufactured through either a casting or sintering process. Alnico magnet is very hard and brittle. Machining or drilling can not therefore be accomplished by ordinary methods.Holes are usually cored in at the foundry. Magnets are cast or sintered as closely as possible to required sized so that abrasive grinding to finish dimensions and tolerances is minimized

Specialized casting techniques used to achieve the unique crystalline grain orientation found in the alnico 5 and 8 grades.These anisotropic grades are designed to produce high magnetic output in a specified direction.Orientation is achieved during heat treatment, by cooling the casting from 2000F at a controlled rate within a magnetic field which conforms to the preferred direction of magnetization. Alnico 5 and Alnico 8 are anisotropicand exhibit a preferred direction of orientation,Magnetic orientation should be specified on your drawing when you send an order to us. alnico magnet, alnico magnets

Cast Alnico 5 is the most commonly used of all the cast Alnico's .It combines high indications with a high energy product of 5 MGOe or more and is used extensively in rotation machinery, communications, meters and instruments, sensing devices and holding applications. The higher resistance to demagnetization(coercive force) of Alnico 8,cobalt content to 35%,allows this material to function well for short lengths or for length to diameter ratios of less than 2 to 1.

Sintered Alnico materials offer slightly lower magnetic properties butbutter mechanical characteristics than the cast Alnico materials.Sintered Alnico magnets are most suitable in small sizes(less than 1 oz.)in this process. The desired mix of metal powder is pressed to shape and size in a die,then sintered at 2300 F in a hydrogen atmosphere.The sintering process is well suited to large volume production,and results in parts which are structurally stronger than cast magnets.Relatively close tolerances can be achieved without grinding. alnico magnet, alnico magnets

The Characteristics of Alnico Magnet:

*Small changes in magnetic properties to temperature effects

*Maximum working temperature can be as high as 450oC~550oC.

*Low coercive force.

*Strong corrosion resistance capability,no coating needed for surface protection.

Typical Applications for Alnico magnet:

Widely used applications such as instruments and meters which require very stable temperature properties.

Electronic ignition systems, watt bour meters, volt-amp meters. medical instruments, industrial motors, magnetic reed switches, generators, hand tools, vending machines. alnico magnet, alnico magnets


Grade

Br

Hc

(BH)max

MMPA Equivalent

Temp. Coefficient

α (Br)

Tc

Tw

mT

KGs

KA/M

Oe

KJ/m3

MGOe

%/oC

oC

oC

LN9

690

6.9

37

470

10.0

1.25

Alnico1

-0.03

760

500

LNG12

700

7

40

500

12.0

1.50

Alnico2

-0.03

810

500

*LNG13

680

6.8

48

600

12.0

1.50

Alnico2

-0.03

810

500

*LN10

600

6

40

500

10

1.2

Alnico3

-0.03

760

500

LNGT18

580

5.8

90

1130

18.0

2.20

[l.Alnico7]

-0.03

860

500

LNG16

800

8

53

660

16.0

2.00

[Alnico4]

-0.02

850

500

LNG34

1180

11.8

44

550

35.0

4.30

[Alnico5C]

-0.02

890

500

LNG37

1180

11.8

48

600

37.0

4.65

Alnico 5

-0.02

890

500

LNG40

1220

12.2

48

600

40.0

5.00

-0.02

890

500

LNG44

1220

12.2

52

650

44.0

5.50

Alnico 5 DG

-0.02

890

500

LNG 52

1250

12.5

55

690

52.0

6.50

Alnico 5-7

-0.02

890

550

LNG60

1300

13

56

700

60.0

7.50

Alnico 6

-0.02

890

500

LNGT28

1050

10.50

56

700

28.0

3.50

Alnico 8

-0.02

860

550

LNGT32

800

8

104

1300

34

4.25

-0.03

860

550

LNGT38

820

8.2

110

1380

38.0

4.75

-0.03

860

550

LNGT44

880

8.8

120

1500

44.0

5.50

-0.03

860

550

LNGT60

900

9

110

1380

60

7.5

Alnico 9

-0.03

860

550

LNGT72

1050

10.5

112

1410

72

9


-0.03

860

550

LNGT36J

700

7

140

1750

36

4.5

Alnico 8HC

-0.03

860

550



Demagnetization Curve of Cast Alnico


Cast Alnico Magnet

Alnico Magnets, Cast Alnico Magnet, Cast Block Alnico Magnets

China-Base Ningbo Foreign Trade Co.,Ltd. , http://www.cbnb-magnets.com