Granite stone granite hardness building materials brand building materials knowledge building materials purchase
Blister copper (content of 99% copper) was prepared in advance as a thick plate, pure copper flakes as a cathode, with sulfuric acid (H2SO4) and copper sulfate (CuSO4) mixture as electrolyte. After power is applied, copper dissolves from the anode into copper ions (Cu) and moves to the cathode. Upon reaching the cathode, electrons are obtained and pure copper (also called electrolytic copper) precipitates at the cathode. Blister copper impurities in lively copper and zinc with copper will be dissolved as ions (Zn and Fe). Since these ions are more difficult to precipitate than copper ions, electrolysis can be avoided by appropriately adjusting the potential difference during electrolysis. Than the inactive copper impurities such as gold and silver deposition in the bottom of the cell. The copper plate so produced is called "Pure Copper Sheet (T2)" and of high quality and can be used to make electrical products. Sedimented in the bottom of the cell analogy as "anode mud", which is rich in gold and silver, is a very valuable object, remove and then processed with high economic value.
Pure Copper Sheet (T2)
Pure Copper Sheet,Pure Copper Plate,High Pure Copper Sheet,Pure Cathode Copper Sheet
Ningxia Tongji International Trade Co.,Ltd. , http://www.tongjiinternational.com