First, gear oil pump layout requirements
1. For pumps placed in open or semi-open spaces, the pump is generally perpendicular to the axis of the prime mover and the axis of the pipe gallery.
2. For indoorly arranged pumps, when the temperature of the delivered liquid is higher than the natural point or the liquid is liquid hydrocarbons, it should be placed in separate rooms with other pumps and separated by a firewall.
When the pump is placed indoors, the traffic requirements of the maneuvering vehicle are generally not considered.
The clearance between the pump end or the pump side and the wall should not be less than 1.2~1.5m, and the clearance between the two rows of pumps should not be less than 2m. The position of the extraction piston and tie rod should be left on the power side and pump side of the steam reciprocating gear oil pump.
When the vertical pump is placed under the pipe gallery or under the frame, the space required for the installation and maintenance of the pump body should be left above it.
Various centrifugal pumps are required for maintenance inspection. When piping is arranged, at least one side of the gear oil pump should be left for maintenance.
Other type gear oil pump maintenance inspection space required.
Second, gear oil pump layout
1. Open-air layout Generally, the pump is arranged centrally under the pipe gallery or on the side. It can also be arranged near the suction equipment. The main advantage is good ventilation and convenient operation and maintenance. If the pump is placed under the manifold, the pump outlet centerline should be aligned, 0.6m from the centerline of the pipe column.
2. The semi-open-air semi-open-air pump is suitable for rainy areas. Generally, the pump is arranged under the pipe gallery and the roof is arranged on the upper part of the pipe. Or the pump is placed on the lower floor of the frame, and the frame platform is used as a ceiling. According to the Ariya gear pump layout requirements, the pumps are arranged in single row, double row or multiple rows.
3. The indoor layout of the pump is suitable for cold or windy areas, as well as occasions where the process has special requirements.
Concerned about surprises
Label: Gear pump layout and requirements
Previous: Features of all stainless steel automatic soymilk filter Next: Reasons for affecting the dynamic efficiency of aluminum shell miniature reducer
Suzhou Newstar Hardware Co.,Ltd. is a professional manufacturer of wrench Socket Set in China. We could offer your socket wrench, universal socket wrench kit, multifunctional wrench socket set, and other kinds of Tool Kit per your needs. We have strong capacity of OEM and ODM services, with different colors, designs, packages, combination of tools. Welcome your visit.
Wrench Socket Set,Socket Wrench,Universal Socket Wrench,Multifunctional Wrench Socket Set
SUZHOU NEWSTAR HARDWARE CO.,LTD. , https://www.newstarhardware.com