FPZ series of self-priming plastic centrifugal pump is made of polyvinylidene fluoride (PVDF), reinforced polyethylene (RPP) injection molding, with high mechanical strength, corrosion resistance, the structure of Unique characteristics. Therefore, attention should be paid to the following when installing and using the pump: Precautions for installation and use of FPZ series self-priming plastic centrifugal pumps 1. Before installing the pump (due to long distance transportation), it is necessary to carefully check whether each part of the fasteners is loose. Loosening should be re-tightened to check the concentricity of the pump shaft and the motor shaft, if any deviation must be corrected. 2, the installation of pipe can not be directly supported on the import and export of the pump flange, you must set up another support point to prevent deformation damage. Import pipelines should try their best to reduce the number of pipelines, hydraulic loss of roads, 90. No more than two elbows, suction tube shall not leak, otherwise it will affect the vacuum pumping time or liquid spit and fluid flow, lack of head. 3, the first time using the boot before opening the infusion cap, will be filled with fluid pump, and tighten the infusion cap, shall not leak, non-slip runaway and reverse rotation. 4, there is a bracket bearing pump, before use must be filled with cooling oil to the mirror half, or to burn out the bearings, and regular replacement of oil. 5, the fluid can not have sediment or longer soft fiber, to prevent plugging damaged impeller and mechanical seal. 6, the pump outlet should be installed valves, shut down the valve and then shut down, then open the valve and then open. In summary is FPZ series self-priming plastic centrifugal pump installation and use precautions, in the actual use of the pump, I hope we can pay attention to these. Read more: China Building Water Exhibition Pump Valve Tube Fittings Exhibition Water Expo Xiamen Maritime Exhibition Internet + Forum Yiwu Expo Industry Interconnection (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Duanhui (QQ / WeChat:) http://beng.liuti.cn/ (service hotline:)
Nylon Flap Wheels
Surface Conditioning Nylon Flap Disc
Removing materials, edges, chamferings, burrs and rust, trimming and dressing of weld joints, and surface cleaning and finishing
The abrasive material structure is fine and uniform, and has good abrasion resistance, so as to ensure that the parts to be ground
have higher size, shape accuracy and finer surface roughness
Features:
High grinding efficiency, can self-sharpening, good heat dissipation. Suitable for irregular curved surface, good heat dissipation, do not burn the workpiece, can grind out the fine sand grain. Used in polishing of metallurgy, machinery, light industry, wood products, furniture, metal, plastic, melamine, building materials, automobiles, leather, textile and other industries.
We distributes and wholesales various brands of Bonded Abrasives , Abrasive Sanding Disc, Cutting Wheels , Abrasive Flap Disc, Flap Wheels , Flap Disc Backing Pad, Flap Disc Adhesive , and Surface Conditioning Product etc, and enjoy a high position among consumers.
Nylon Flap Wheels,3m buffing,Non Woven Wheel,Non Woven Abrasive Wheel,Nylon Abrasive Polishing Wheel
Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.jd-abrasives.com