Door and window cover construction and acceptance

Construction 1. Make curtains boxes according to requirements of rooms and drawings. If curtains are installed without curtains, attention should be paid to the distance between the opening of window frames and the thickness and length of curtain rods when installing curtain rods.

2. When making a panel curtain box, first make a 7-shaped frame pinned to the top, and both sides should be sealed with wood panels. The vertical border under the application of a 20 * 18mm wooden bar reinforcement, nailing, to prevent deformation, such as the re-sealed Nails decorated with water, do mixed water paint must ensure that the grass-roots surface smooth.

3. When the window cover is made of block board or density board, the base board should be fixed on the keel of the window frame base and then nailed. “Zi” shaped nails prevent the curling of the lines, the angle should be dense and smooth, the window cover The next mouth should use marble, so as to avoid deformation due to moisture.

4. After the door cover is made of wood, the frame shall be planed and straightened, then installed on the wall in assembly molding, covering the base board and veneer.

Acceptance 1. The door pockets should be vertical, the veneer should be flat and square, and there must be no head and bell mouth.

2, wooden doors, window covers cut corners neat, tight seams, smooth surface, no planing, burrs.

Construction acceptance window and door acceptance window marble wooden door room paint

Wall spikes are just one of a number of types of anti climb security spike and whilst the name Wall Spike indicates that they are designed to be mounted on a wall (typically along the top edge), they can often also be found welded or otherwise fixed along the top of steel gates and robust fences.

Wall Spikes are a simple yet effective method of enhancing the security of an existing wall or security Fence . The wall spikes are easy to install and come in a variety of coatings or finishes.
Popular types of wall spikes include big type wall spikes and medium type wall spikes and small type wall spikes, with the spikes being manufactured from a range of materials including weather resistant plastics, steel and aluminum, among others.
Features:
materials: hot dipped galvanized, stainless steel, PVC coated plates.
Plate thickness: small type spikes with 1mm, and other wall spikes with 2.0mm. 
Barb length: 64mm and 100mm
wall spike strips length 500mm to 2000mm
Metal anti climb spikes new specifications: 
Base length :0.5 to 2 meter,
Spike height :100 to 140 mm.,
Base width:35 to 50 mm.,
Spikes pitch:70 to 90 mm.

Wall Spike

Wall Spike,Galvanized Wall Spike,Razor Wall Spike,Barb Wall Spike,Stainless Steel Wall Spike

Anping Weihao Hardware Wire Mesh Products Co., Ltd. ,