The construction safety agreement is an agreement drawn by the project contractor and the contractor on the basis of equality under voluntary conditions. The main purpose of the construction safety agreement is to ensure the personal safety of the construction personnel during the construction process, and to put the danger and threats. In its infancy, it completely wiped out the important measures and measures in the cradle. Here we look at the contents of the construction safety protocol book contains what.
Construction Safety Agreement
The first part of the construction safety agreement is to give a general introduction to the basic conditions of the project, including the name, address, scale and scope of the project.
The second part of the construction safety agreement is to make a clear provision for the term of validity of the agreement. The limited period of the general construction safety agreement is the final moment of construction and it is in sync with the construction.
The third content of the construction safety agreement is to clarify the responsibility of the project contractor for safety. The Employer shall call the relevant organization to carry out a preliminary review of its qualifications and conditions. After this review and examination is passed, the relevant tendering and bidding work can be held for the Project. In addition, the contractor of the project must be subject to a certain qualification examination to check whether it has the relevant qualifications for the bid for the project. See if the arrangement of the construction personnel meets the requirements for the safe development of the project, and also the equipment it possesses. The equipment carries out certain safety checks and clarifies the process of safe operation of the project.
The fourth aspect of the construction safety agreement is to clarify the safety responsibilities of the project contractor. From the initial construction staff to the completion of the construction must be consistent with the state's relevant provisions on construction safety, to minimize the risk factor during the construction process, to minimize safety hazards.
The final content of the construction safety agreement is to make a provision for the treatment method if safety responsibility occurs during the construction process, and it also has provisions for the damage of machinery and equipment if it is caused during the construction process.
Project Construction Safety Agreement Template
Party A:
Party B:
According to relevant state regulations and contract documents, in order to ensure the achievement of various control objectives of the project department and earnestly implement safety responsibilities, Party A and Party B negotiate and Party A will use Party B's part during construction of the project site undertaken by this project department. Labor services and machinery and equipment are managed by Party B under the premise of Party A responsible for controlling safety management. The safety production agreement reached by the two parties is as follows:
First, Party A's rights, responsibilities and obligations
1. Comprehensive safety management and supervision shall be carried out on the construction site of Party B, and the temporary electricity safety at the construction site shall be inspected and instructed.
2. Found that the construction personnel of Party B had violated regulations and operations, they must promptly correct and investigate in accordance with the relevant regulations, and issue a notice to the major safety hazards on the construction site of Party B.
3. Establish and improve the safety production management system at the construction site.
4ã€Provide leading opinions on the use of your tools for Party B's safety production training, danger prediction and labor protection, and supervise the implementation.
5. Actively provide assistance to Party B's safety production requirements.
6. When providing power to Party B, Party B shall go through the acceptance formalities with Party B.
7. It is found that Party B must order rectification if there are hidden dangers in temporary electricity use. And supervise the implementation of the rectification.
8. Make a record of the list of Party B special operations personnel, photocopy of operation certificate and training records.
Second, Party A's rights, responsibilities and obligations
1. Observe construction safety regulations and management systems and establish a sound safety system. It is fully responsible for the temporary power management in the construction environment.
2, obey the safety production management of Party A.
3. Party B must participate in personal accident insurance for construction workers.
4. When Party B causes a production safety accident and causes casualties, Party B shall bear the responsibility for accidents and economic responsibility.
5, without safety production education training and undocumented personnel, may not be on duty.
Third, the rights, responsibilities and obligations of Party B
1. Party B must adhere to safety production terms and strictly follow the safety and hype procedures.
2. Party B's personnel must comply with the safety production system and safety regulations formulated by Party A when entering the construction site.
3. Party B must have more practical conditions to hang the safety warning signs at the construction site and find that the illegal operations are promptly corrected.
4. During the implementation of the project contract by Party B, all safety is borne by Party B and has nothing to do with Party A. Party B shall bear if Party B bears the cost of purchasing accident insurance for each construction personnel.
5. As Party B’s tools, equipment, and construction are not suitable for safety regulations, Party A or Party B’s third person’s casualty accident shall be responsible for Party B’s losses and shall be reported by Party B, organize an investigation, and accept treatment.
6. Party B's special operations personnel must hold certificates, and one party must have special personnel responsible for safety inspections.
7. Party B erects temporary electric wires to access the power supply, etc. Only after the approval of relevant units can the operation be carried out. Party A has the right to check the agreement in accordance with the agreement. If Party A finds a violation of the rules, Party A has the right to request that the operation be stopped. The loss shall be borne by Party B.
Fourth, the construction site environmental requirements
1. Coverage measures must be taken when transporting fine-grained materials on the construction site.
2. The construction of a closed oil depot lamp at the construction site shall be done in a waterproof manner. The capacity must be inadvertently leaked, and it must not be placed outside inflammable and explosive materials.
3. The mechanical construction at the construction site must take effective measures to reduce noise.
4. In places where dust is easily generated, construction workers must wear masks and take measures to reduce dust and ensure the health of construction workers.
V. Others
1. This agreement shall be effective when signed by the representatives of Party A and B and affixed with the official seal of the company, and shall terminate when the acceptance of the project is completed.
2. This agreement is in quadruplicate: Party A holds three copies and Party B holds one.
person A person B:
Representatives of Party A: Representatives of Party B:
Signing time: Signing time:
Editor's summary: The above is the relevant knowledge of the project construction safety agreement template brought to everyone today. I hope to help friends who have this need! Although the construction safety agreement may only be a few thin sheets of paper, the connotation and responsibilities it bears are very great.
Construction Installation Decoration Construction Knowledge Construction Bottom Construction Contract Construction Safety Agreement
KD METALS (JINGJIANG) CO.,LTD , https://www.toprivet.com