Cabinet hardware purchase points

The hinge is one of the necessary hardware that the cabinet cabinet and the door panel are joined and opened and closed repeatedly. Since the opening frequency of the door panel is the highest during use. Therefore, the quality of the hinge is particularly important. Opening and closing effects and durability, naturalness, smoothness and silence are basic requirements. Followed by the adjustable: up and down, left and right, before and after the adjustable range of 2mm; the minimum opening angle should be 95 and a certain degree of corrosion resistance and safety. The good hinges are hard to pick up by hand, the reeds are solid, the mechanical folds are not shaken, and when it is closed to 15 degrees, it will automatically rebound, and the resilience is very even.

The hinges are divided into ordinary and quick loading. The block hinges can quickly realize the separation and combination of the door and the cabinet. The price difference between the two will be 3 or 4 times. The domestic use ordinary hinges. Foreign cabinets use quick-set hinges because of the foreign The labor cost for installing workers is very high. In contrast, the use of quick-moving hinges saves labor and the overall cost is cheaper. The differences in national conditions have caused differences in the use of materials.

A good quality hinge can be turned on and off tens of thousands of times and is easily flexible. At the corner of the cabinet door, two linkage hinges were installed and the space was well utilized.

The technical function and quality of the slide rails should be second only to the hinges. The preferred sliding function should be the natural combination of the smoothness and the weight-bearing effect. Under the rated load-bearing conditions, there is no obvious frictional sound and jamming phenomenon, and the sliding is smooth. It plays an important role in the use and life of the drawer.

Pull hand in hand should be beautiful appearance, fine workmanship. No rust on the metal surface, no defects in coating, no burr sharp edges. Generally divided into invisible handle and general handle. Personally think that aluminum alloy invisible (full body) handle the best, mainly because it does not occupy space, will not touch people, but some people say it is not easy to do health.

Hanging Cabinet Pendant Install a special assembly for the cabinet. Hanging pieces are fixed on the wall. Hanging yards are fixed on both sides of the upper and lower corners of the hanging cabinet. After being hung up and down, the positioning adjustment can be performed up and down, front and rear, and finally, a cabinet body combiner is added to ensure the fixed quality and use. effect. The quality requirements of the special assembly: each hanging code should be able to withstand the vertical hanging force of 50KG; with three-dimensional adjustment function; plastic parts should be flame-retardant, no cracks and scars. In order to save costs, some small manufacturers use screws to secure the wall cabinets. This method is neither beautiful nor safe, and the adjustment of the position is also troublesome.

Skirting boards are made of cabinet materials, PVC and aluminum alloys. The main function is to prevent debris from entering the lower part of the cabinet. Another function is aesthetics. By opening the baseboard of the cabinet, it can be seen that there are four adjustable foot support cabinets at the bottom of each cabinet of the cabinet. Each adjustment foot should be able to withstand a capacity of not less than 100 kg; the material of the adjustment foot should use ABS to ensure that its strength reaches the load-bearing requirements. Cabinet legs are generally 12CM high.

The storage hardware is made of stainless steel and other metal materials, making full use of one of the space hardware, easy to use and clean the kitchen environment, including seasoning baskets, three-side pull baskets, four-side pull baskets, basket pull baskets, deep baskets, Lift baskets, turntable baskets, rice boxes, trash cans, cutlery trays, etc.